Looking to hire an experienced hardware engineer who is familiar with the semiconductor equipment manufacturing industry and doesn‘t shy away from the challenges that come with it, along with supporting Lam‘ s top tier customers. In addition to being Safety First oriented, the prospective candidate should possess strong organizational skills, be a critical thinker, and able to comprehend electrical schematics and equipment drawings. They also need to be able to effectively communicate in English. Being knowledgeable and having previous experience supporting Lam‘s SIG (Prevos, Selis, Argos) and Bevel (Coronus) products is preferable. This person will need to manage their time, work collaboratively within cross-functional teams and multi-task, to resolve our internal and external customer issues as quickly as possible. This position is based in Hsinchu. Must be willing to relocate if they‘re not already in Hsinchu. Job Responsibilities • As a Regional Product Support Engineer at Lam, you‘re the backbone of technical support for field engineers, technicians, and product support personnel in the region. • Your expertise is crucial in diagnosing, troubleshooting, repairing, and debugging complex electro-mechanical equipment, computer systems, software, or networked and wireless systems. • Your swift action in responding to situations is critical in resolving issues and ensuring satisfaction of Lam‘s valued customers. Other information: • Residence Location – Flexible • Work location – Hsinchu • Travel – PS team is centralized organization, so PS engineer isn‘t dedicated to a specific work location. (1) Need to take not only domestic but also international travel if needed (2) The frequency of travel depends on the demand from customers including Act team (3)＞30％ travel commitment

Responsibilities: Technical: • Communicates as a subject matter expert on high level technical issues and escalations while providing guidance and recommending solutions. • Provides technical support to field engineers, technicians, and product support personnel who are diagnosing, troubleshooting, repairing and debugging complex electro/mechanical equipment, computer systems, complex software, or networked and/or wireless systems. • Responds to situations where first-line product and escalates or finds solutions in malfunctioning equipment or software. • Reports design, reliability and maintenance problems or bugs to design engineering/software engineering. May be involved in customer installation and training. • Partners with the account team to present to customers the problem statement, identified root causes and getting buy-in on proposed solutions • Identifies and communicates opportunities for installed base performance improvements within a customer site/account through hands on and or installed based performance data collection/analysis • Drives required actions at the customer site to resolve escalations and prevent repeat problems • Liaises between Customers, Product Groups, Field Sales, Business Development and other organizations to ensure closure of product issues. May works closely with Account GM(s), CSOMs and other senior level engineers in Field, CSBG and GPG. • Participates in the review of procedures, processes and tool design impacting development activity. • Manages projects and provides reports to management to deliver the desired result. Conduct customer escalation meetings. • Present technical and marketing materials to a high standard. Leadership: • Participates in Lam‘s worldwide technical community and actively shares knowledge and takes a leadership position to enhance worldwide learning and its application. • Acts as technical mentor for field and account engineers and may design or conduct training sessions. Customer Relation: • Provides support to customer/users where the product is highly technical or sophisticated in nature. • Develops customer confidence through credible recommendations and an understanding of the customer’s perspective to support sales, service and revenue. • Support process projects and manage customer and product group to drive to closure.

What You‘ll Do: • Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam‘s complex electro-mechanical and electronic systems at customer sites. • Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions. • Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification. • Maintain records and reports to coordinate activities between Lam and the customer. • Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction. • Transparently discuss opportunities and challenges with customer to increase trust. • Update customer on status of Lam tools as needed.

Job Responsibilities: 1. Order processing: Process customer orders, ensuring accuracy and efficiency in order entry; Track and monitor order status, providing regular updates to customers. Sox control and compliance. 2. Customer interaction: Manage incoming calls from external customers and internal filed engineers in a professional and courteous manner; Act as the primary point of contact for customers seeking information about Spare Parts; Listen attentively to customer inquiries, concerns, and requests. 3. Issue Resolution: Assist customers in resolving issues, such as order discrepancies, product defects, by coordinating with relevant departments; Initiate returns or replacements as needed, ensuring customer satisfaction. 4. Streamline projects: collaborate with company G&O on the program management. 5. Cross functions operation: accept new assignments during CSBG sections of CS, Logistics and CSBG Admin , and own ability to handle the cross functions operation.

【Mission】 Own the end‑to‑end regional logistics network for spares—covering materials flow, inventory integrity, import/export compliance, 3PL performance, and customer service levels—to minimize fab downtime and maximize on‑time delivery with cost discipline. 【Key Responsibilities】 • Ops/Inventory: plan/control flow & data; ensure critical parts; run multi site WH/resupply; escalation; align to build plans; own financials/budgets; drive 8D/5 Why/Fishbone. • Compliance: SOX/ISO, safety, environmental, quality; BCP readiness. • 3PL/Systems: 3PL governance; WMS/SAP integrity; improvements & deployments (ECC/S/4/EWM, WMS, TMS); QC KPIs/training • Local transportation:　Develop and execute transportation strategies aligned with company goals. • People: hire/develop/evaluate; high trust, data driven, customer first. • IE & Customer: value stream, time/motion, capacity/bottlenecks; data prioritized fixes; A3/Kaizen/RCCA; SOP/WMS/TMS/SAP updates; customer window; voice of the cusotmer→projects; change control.

• Conducts technical training courses for customers and/or employees in the use of complex situations for multiple products. • Interacts with customers and functional organizations to develop specifications for content of courses. • Prepares lesson plans from engineering documentation, field service requirements or software documentation. • Works with engineering, technical support and manufacturing to ensure that course material reflects current product features. • Instructs participants in both classroom lectures and laboratory sessions. • Follows up to determine applicability of course material.

Job Duties and Responsibilities (Technical and Operational) 1. Responsible for HVM Fab sales activities including revenue commits and delivery, building customer trust and installed base management (escalation, contract performance, CoC and productivity). 2. Provide accurate sales forecasts and update regularly regarding to change of prior plan. Issue quotation, Configuration and NSR (Non-Standard Requirement) for proper configuration and system slotting 3. Developing and executing strategies and actions for account team key application defense and penetration. To gain market share, and profitability. 4. Understanding Internal & External customers‘ needs and to build a strategic & sustainable relationship with them. 5. Serve as the primary Lam person regarding TSMC product/Business details and explanation, handling appropriate paperwork pertaining to Sales and delivery, and final negotiations. 6. Regular collaboration/coordination with Account‘s Sales/Process/Service Team in order to review status and plans to ensure an organized and efficient approach to penetration and installed base success to ensure Customer Trust activities. 7. Coordinate specific installation and process acceptance schedules with CSOM for timely system acceptance and manufacturing readiness.

Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership 1. May Provide on-site instruction to sub-contractors and customers. Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site.

Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site

1. Develop Lam’s spare parts business strategy in collaboration with Business Development Managers, the tool sales team, and Product Groups. 2. Execute Lam’s business strategy and project plans to secure and grow spare parts market share across all Lam platforms. 3. Streamline spare part–related processes and ownership, including loaners, New Part Applications (NPA), Part Change Notifications (PCN), Product Lifecycle Management (PLC), part attribute definition, and part pricing parity. 4. Lead spare part cost reduction projects, including localization initiatives and alternative solution development in collaboration with Product Management and the Business Groups.

Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision 8. Perform other related duties as assigned by senior FSE / supervisor Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site

1. High travel rate: 70~75％ of the time, including international travels. 2. Comply with all safety procedures and demonstrate safety consistently as a value. 3. Complete the installation by consistent result with specified cycle times. Control the spending within budget. Train the local engineer to have same knowledge and skills. 4. Perform all standard installation activities from system move-in (Tier0), hardware setup (Tier1), process tuning (Tier2) independently. 5. Be able to run upon shift model as needed and perform routine preventative maintenance within established timeframes. Complete quality repairs. 6. Plan assimilation & Training: Train ramping operations (SOP, EHS), product knowledge assimilation, and conduct cross-product training during off-ramping. 7. Organize startup lesson learn with overall account team. 8. Work with site management to drive the MFG (manufacturing) quality improvement plan. 9. Diagnose and resolve technical problems. Use training and experience to identify process and software or hardware related system problems. 10. Assume responsibility to follow customer ground rules, regulations, and for complete customer satisfaction within work area. Assist in planning, communicating, and coordinating the installation plans with customer. 11. Respond to fab issues by communicating with other engineers and participating in escalation conference calls. Apply diagnostic techniques, using of documentation, and test equipment with assistance from senior engineer. May participate in projects to reduce costs and increase uptime.

We are looking for a talented Senior Engineer ( with EOS, DV, DVP or Sabre3D experience will be great) to become a part of our Global Flexible Workforce Team. 1. High travel rate: 75％ of the time, including international travel (could over 50％). 2. Comply with all safety procedures and demonstrate safety consistently as a value. 3. Complete the installation by consistent result with specified cycle times. Control the spending within budget. Train the local engineer to have same knowledge and skills. 4. Perform all standard installation activities from system move-in (Tier0), hardware setup (Tier1), process tuning (Tier2) independently. 5. Be able to run upon shift model as needed and perform routine preventative maintenance within established timeframes. Complete quality repairs. 6. Plan assimilation & Training: Train ramping operations (SOP, EHS), product knowledge assimilation, and conduct cross-product training during off-ramping. 7. Organize startup lesson learn with overall account team. 8. Work with site management to drive the MFG (manufacturing) quality improvement plan. 9. Diagnose and resolve technical problems. Use training and experience to identify process and software or hardware related system problems. 10. Assume responsibility to follow customer ground rules, regulations, and for complete customer satisfaction within work area. Assist in planning, communicating, and coordinating the installation plans with customer. 11. Respond to fab issues by communicating with other engineers and participating in escalation conference calls. Apply diagnostic techniques, using of documentation, and test equipment with assistance from senior engineer. May participate in projects to reduce costs and increase uptime.

【招募職缺】 設備工程師｜Field Service Engineer • 電機／機械／航太 / 自動控制 等相關理工科系學士或碩士畢業 • 對半導體產業及設備工程職務具高度興趣 • 需有機械相關的基礎知識 有半導體製程知識者尤佳 • 需有問題解決、溝通表達、團隊精神、主動學習等能力 • 需能配合大多數工作時間內，穿著無塵衣且將在無塵室環境中工作 ______________________ 【面試資訊】 • 活動日期：3/28（六） • 活動時間：上午場 09:00–12:00｜下午場 13:00–16:00 • 活動地點：台南 • 工作地點：台南／高雄 ※ 3/28場次優先招募台南/高雄職缺。錄取後需配合公司安排在這兩個地區工作，若對於這兩個地區有意願再請投遞履歷。 ______________________ 【活動亮點】 • 與部門主管及 HR 現場面對面交流 • 深入了解美商半導體設備商的實際工作內容、值班模式與員工福利 ______________________ 【招募流程】 • 第一階段｜履歷投遞與英文能力評估，若無英文成績單需參加線上英文測驗 • 第二階段｜由用人主管進行履歷審核，若審核通過者將於 2 週內安排電話面談 • 第三階段｜通過審核後，提交制式工作申請表，將發送活動邀請 • 招募面談｜3/28（六） 參與F2F招募活動，現場與主管進行面試

我們是一家專注於提供長期照護及護理服務的護理之家，致力於提升住民的生活品質，主要服務對象包括需要專業醫療照護的長者及特殊需求患者。我們注重提供全面性照護，結合理論與實務，打造溫暖且專業的居住環境。 1. 提供住民身體評估及健康觀察，確保其生活指標穩定。 2. 負責藥物管理，包括發藥、備藥及用藥指導，並依醫囑執行各項護理工作。 3. 協助醫療處置及護理操作，如傷口包紮、換藥、注射、點滴及基本醫療儀器操作。 4. 制定並執行個別化的護理計畫，協助復健活動，促進住民健康恢復。 5. 協助醫師進行各項檢查、診療並記錄住民健康狀態及護理紀錄。 6. 執行感染管制措施，保持護理之家清潔與安全。 7. 進行衛生教育，向住民及家屬提供疾病預防及居家保健指導。 8. 管理護理耗材及設備，定期進行盤點與補充。 9. 主動參與團隊討論與會議，分享個案分析與專業見解，提升照護效率。 10. 持續學習並熟悉醫療相關法規與標準，提升自身專業知識與技能。 歡迎具護理熱忱且致力於提升長照品質的您加入我們的團隊，投入這項具挑戰性且充滿意義的專業工作！立即投遞履歷，我們期待與您攜手共創更佳的護理服務！

『許多門』 從2013年的台中館開始開幕至今，全台已經超過80萬挑戰人次 目前有『台中館』『公益館』『嘉義館』『台南館』『高雄館』超過16個主題 藉由密室逃脫、團體動力、實境解謎 這樣新型態活動 希望讓人滿足好奇、充滿快樂、遇見驚喜並重拾夥伴親友間的聯繫 工作中，你會看到人與人相處的互動與珍貴 並幫助大家找回冒險的心，看見他們最純真的笑容！ 我們需要你負責任、工作有熱忱，喜歡與人接觸 並且有願意學習與不斷進步的態度！ 如果你準備好面對挑戰，希望加入許多門的團隊 就把你的履歷寄過來吧！ 活動指導專員工作內容（基本店務）： 1.基本店務：店面整潔、活動場景恢復、道具修復架設 2.顧客接待：現場接待、活動說明、挑戰流程引導、電話接聽 3.活動引導：主題內容引導、解謎技巧引導 4.行銷宣傳：發放文宣單張、協助行銷活動

1.會操作使用「正航軟體」 2.一般會計帳務處理、行政、文書資料處理。 3.記錄及彙整交易產生之原始憑證，並登錄至會計系統製作傳票。 4.採購 計算 成本管控。 5.主管交辦事項。

我們是領先的汽車與重型機車品牌Honda，致力於提供高品質的交通工具與相關服務，滿足不同消費族群的需求。我們的高雄店以專業的服務與廣泛的產品選擇，為重機愛好者提供一站式的解決方案，並以客戶滿意為最高目標。 工作內容： 1. 接待車輛進廠的顧客，協助完成服務登記及需求確認。 2. 提供車輛保養與維修的專業報價及相關細節說明。 3. 負責顧客關懷與售後服務，包括追蹤訂單進度及反饋處理。 4. 協助管理客戶關係，包含定期維護客戶聯繫與提供促銷資訊。 5. 熟悉並運用公司內部系統進行資料登錄與維修記錄管理。 6. 參與內部教育訓練，提升對大型重機產品的了解與接待技巧。 7. 協助完成店內銷售活動及促銷專案的執行。 8. 定期整理相關市場情報與顧客需求分析，向主管匯報。 我們期待有熱忱、有責任心的你來加入Honda高雄店的接待團隊，與我們共同為大型重機愛好者提供卓越的服務體驗！立即投遞履歷，成為這份熱情與專業的一員吧！

1.運送貨物並保護貨物的完整 2.將貨品送到客戶手中，並請客戶進行簽收 3.出、退、換貨作業事宜、清點貨物

工作內容: 歡迎您加入GAP，成為我們團隊中不可或缺的一員,您將擔任品牌大使，向顧客介紹GAP 最時尚的產品及傳達品牌理念,並且提供給顧客最佳的購物體驗! 【工作任務】 1. 成為全方位的品牌大使,提供顧客良好的服務; 2. 提供個人穿搭建議,讓顧客體驗最佳的美式風格; 3. 輔助陳列工作,以確保良好的購物環境; 如果您具備下列特質,歡迎加入我們! 1. 為顧客服務充滿熱情; 2. 具有良好的溝通能力,能透有效地與顧客和團隊互動,已達成店鋪目標; 3. 喜歡與人互動,為我們的顧客提供卓越的體驗; 4. 樂於學習與成長; 【薪資福利】 1. 兼職夥伴: 時薪209-214元 2. 獎金津貼: 季度業績獎金/店鋪競賽獎勵/夜班津貼/優良員工月度獎勵; 3. 服務期滿給予年假時數; 【教育訓練】 1. 完整在職訓練計畫,培養您成為零售業人才; 2. 表現優良者, 可優先申請參加大中華區店鋪主管培訓營; 【排班需求】 可依個人選擇時段排班,每次給班至少4小時;每週至少提供20小時