研發替代役

SHL Medical is the world-leading solution provider in the design, development, and manufacturing of advanced drug delivery systems with more than 5000 employees worldwide. Our customers include top pharmaceutical and biotech companies from around the globe that require innovative devices such as auto injectors or pen injectors to effectively deliver their drugs. Headquartered in Switzerland, SHL has sites in Sweden, Taiwan, and the Unites States. Job Overview This role is embedded in the Automation Technology Team within Operations Engineering Department in Taiwan. Your responsibilities ● Improve system & equipment reliability for the core processes to meet all customer, business & regulatory requirements ● Together with the rest of your team you will support the production for automated assembly of our autoinjector systems ● Lead engineering responsibility for production/product lines and corresponding assembly processes within our production system ● Collaborate closely with shopfloor production technicians, equipment builders and maintenance, quality and process development on performance/process improvements and trouble shooting ● Lead the development of improvement plans and requirements for capacity expansion and future assembly lines and production setups ● Lead improvement initiatives and capacity deployment in device assembly ● Responsible for manufacturing acceptance of new assembly lines / processes in regular production ● Support Design For Manufacturing (DFM) and definition of manufacturing requirements for new products Your qualification ● Degree in Engineering or equivalent education/experience in a relevant field ● Several years of relevant hands-on manufacturing experience with highly automated high-volume production systems ● Familiar with Siemens PLC based systems, sensor, actuator and vision technologies, SCADA ● Proven expertise in planning/organization/execution of maintenance activities, following up on results, & revising the work plan for complex problems being resolved by cross functional teams ● Knowledge of common problem-solving and Root Cause Analysis (RCA) methodologies; Six Sigma certification is a plus. ● Passionate & committed self-starter with “can do” attitude, team player and taking responsibility to get the job done ● Ability to work independent with strong attention to detail and focus on efficiency, effectiveness and cost ● Previous exposure to a highly regulated industry (e.g. medical, pharmaceutical) and knowledge of relevant standards (e.g. ISO13485, cGMP) is a plus ● Intercultural and interdisciplinary communication skills; able to communicate effectively in English (verbal, written) We offer ● Flexible hours and working from home policy. ● Modern working environment with state-of-the-art facilities and technologies ● Challenging assignments in a fast growing and innovative industry ● Position in a dynamic, international team of highly skilled professionals ● Various opportunities for personal and professional development within a global organization

【Job Overview】 This role is embedded in the Molding Technology Group within our Global Operations Engineering team in Taiwan. 【Your responsibilities】 ● Together with the rest of your team you will support the production of injection molded components for our autoinjector systems ● Collaborate closely with shopfloor production technicians, tool makers and maintenance, quality and process development on performance/process improvements and trouble shooting ● Lead the development of improvement plans and requirements for capacity expansion and future mold generations and production setups ● Lead cross-functional Root Cause Analysis and Event Response Investigations ● Lead cross-functional improvement projects and capacity deployment projects ● Coordinate manufacturing acceptance of new molds and process in regular production ● Coordinate Design For Manufacturing (DFM) assessments and definition of manufacturing requirements for new products 【Your qualification】 ● Degree in Mechanical Engineering, Polymer Science or similar education/experience ● Relevant industry experience in manufacturing / injection molding / mold making / product industrialization (For the right candidate who is keen to learn, this could also be your first job after graduation) ● High level of independence, positive and curious attitude ● Strong attention to detail and focus on efficiency, effectiveness and cost ● Passionate & committed self-starter with “can do” attitude, team player and taking responsibility to get the job done ● Knowledge of relevant polymer processing technologies is a plus ● Knowledge of common problem-solving and Root Cause Analysis (RCA) methodologies (6 sigma / DMAIC, 8D, A3) is a plus ● Intercultural and interdisciplinary communication skills; able to communicate effectively in English (verbal, written) ● Ability to communicate in Mandarin is highly desirable 【We offer】 ● Competitive compensation package ● Flexible hours and working from home policy. ● Modern working environment with state-of-the-art facilities and technologies ● Challenging assignments in a fast growing and innovative industry ● Position in a dynamic, international team of highly skilled professionals ● Various opportunities for personal and professional development within a global organization

【Job Overview】 This is a senior leadership role within our Global Operations Engineering team in Taiwan leading a large cross-functional program with high impact across the entire organization and providing progress reporting directly to executive management. 【Your responsibilities】 • Lead and direct large capital projects end to end through Ideation, Design, Execution and Assessment • Lead collaboration of the Engineering Group across other functional areas, establishing effective working relationships with all Business Partners. • Lead the Alignment of the Sponsor, Key Stakeholders, Core and Extended team to deliver the Final Project Objectives • Lead communication via Sponsor to Key Stakeholders on all aspects of projects and maintains strong internal project communications including presentations to Key Stakeholders • Lead project planning, execution, tracking and reporting against project Key Deliverables and Final Project Objectives. • Establish and maintain appropriate structures to ensure communication, flow of information and documentation within the project • Lead the selection of appropriate project functions and project resourcing and the development of strategies and Project Delivery Processes and tools • Lead risk management, evaluate, eliminate or mitigate risks to Final Project Objectives • Lead Coordination of the design, execution and close out of all project related activities including managing internal resources and the procurement of third-party contractors, suppliers and consultants and ensures the project remains on target: incl., but not limited to safety, scope management, contract and construction management, legal and corporate compliance, quality, project controls, commissioning, qualification and validation of FDA and other agencies regulated facilities, technology transfer and regulations governing product manufacturing • Lead Change Identification and request for changes, liaising with and informing the Sponsor, Core and Extended teams • Undertakes all Learning and Development to ensure Highly Capable Leadership, coaches and mentors others engaged in Project delivery 【Your qualification】 • Degree in Engineering or Applied Sciences • Minimum 10 years relevant industry experience in Operations, Product Development and/or Engineering • Project management and leadership experience in complex, large-scale CAPEX projects with numerous stakeholders and workstreams • Experience with corporate business transformation projects (product or process) • Proficient in state-of-the-art PM methodologies and tools • Experience in multiple areas: Production infrastructure and site development / Capacity scale-up / Logistics & supply chain management / Technology Transfer / Product & Platform development / Re-medication • Previous exposure to a highly regulated industry (e.g. medical, pharmaceutical) and knowledge of relevant standards (e.g. ISO13485, cGMP) is highly desirable • Lean / Six Sigma experience is highly desirable • Strong intercultural and interdisciplinary communication skills; excellent written and verbal English • Self-starter and fast learner, able to deal with ambiguity in a complex, dynamic and changing environment • Able to work under pressure to achieve short-term targets without compromising long-term objectives • Ability to communicate effectively in Mandarin is a plus 【We offer】 • Competitive compensation package • Flexible working hours • Modern working environment with state-of-the-art facilities and technologies • Challenging assignments in a fast growing and innovative industry • Position in a dynamic, international team of highly skilled professionals • Various opportunities for personal and professional development within a global organization

SHL Medical is the world-leading solution provider in the design, development, and manufacturing of advanced drug delivery systems for the past 30 years with more than 5000 employees worldwide. Our customers include top pharmaceutical and biotech companies from around the globe that require innovative devices such as auto injectors or pen injectors to effectively deliver their drugs. Headquartered in Switzerland with sites in Sweden, Taiwan, and the Unites States. This role is embedded in the Factory Development & Projects group within our Global Operations Engineering team in Taiwan. Your responsibilities · Lead and manage challenging Industrialization, Infrastructure/Site development and technology transfer projects in Operations · Plan and manage production scale-up and capacity deployment projects as well as related product care initiatives in Operations · Develop concept studies and strategic decision proposals to senior management · Responsible for project planning, deliverables, schedule, cost and quality as well as management reporting · Establish and maintain appropriate structures to ensure communication, flow of information and documentation within the project · Cross-functional leader role interacting with senior management, various departments, internal stakeholders and clients · Ensuring effective change management and implementation of site infrastructure enabling fast and sustained ramp-up of production and benefit realization Your qualification · Degree in Engineering or Applied Sciences · Minimum 6 years relevant industry experience in Operations/Logistics, Manufacturing, Production Scale-up, Technology transfer or Facility/Construction management · Project management and leadership experience in highly complex projects with numerous stakeholders; proficient in state-of-the-art PM methodologies and tools · Experience in one or more of the following areas: manufacturing infrastructure and site development / intralogistics / supply chain management / contract manufacturing / technology transfer / injection molding, process automation · Previous exposure to a highly regulated industry (e.g. medical, pharmaceutical) and knowledge of relevant standards (e.g. ISO13485, cGMP) is a plus · Lean / Six Sigma experience is a plus · Strong intercultural and interdisciplinary communication skills; excellent written and verbal English · Self-starter and fast learner, able to deal with ambiguity in a complex, dynamic and changing environment. · Able to work under pressure to achieve short-term targets without compromising long-term objectives We offer · Competitive compensation package · Flexible hours and working from home policy. · Modern working environment with state-of-the-art facilities and technologies · Challenging assignments in a fast growing and innovative industry · Position in a dynamic, international team of highly skilled professionals · Various opportunities for personal and professional development within a global organization

【Job Overview】 This role is embedded in the Factory Development & Projects Group within our Global Operations Engineering team in Taiwan. 【Your responsibilities】 ● Lead the development and implementation of factory and plant layouts together with our internal planning and SME teams and external contractors (architecture, design, planning, etc.) ● Ensure all stakeholder requirements are considered in the planning process and are translated into optimized factory designs, both from an Operational and Sustainability standpoint ● Review factory design and optimize site layouts for production, material flow, construction, and facilities. ● Convert identified potentials in production and logistics processes into a competent planning. ● Ensure compliance with relevant Codes, Standards and HSE requirements ● Ensure execution of standards, processes and procedures for effective delivery of operations excellence ● Work with manufacturing, logistics, facilities teams and contractors to ensure that equipment and layout designs align with the overall logistics and operational plans of for the factory ● Factory equipment and facilities: Develop equipment specifications and requirements based on product constraints / Provide design layouts and equipment solutions / Conduct equipment design reviews and provide design guidance to vendors. ● Support integration of systems and processes in to global digital landscape (EWM, EAM, MES,…) ● Provide technical leadership support to Project Managers to drive planning, implementation and project execution with the team ● Review and approval of critical layouts and facility specifications (space allocation, material flow, MEP, etc.) 【Your qualification】 ● Degree in Engineering, Construction, Production Management or other relevant discipline ● Minimum 10 years of relevant industry experience in Production Management, Operations/Logistics or Factory Planning/Design ● Hands-on production/logistics management experience in a high-volume, high-throughput production environment; Familiar with LEAN process optimization ● Proficient in layout design (preferably AutoCAD) and relevant drawing standards ● Knowledge of automated material handling / warehouse systems, production logistics, end of line installations, warehouse transportation and material flow optimization ● Knowledge of MEP and logistics requirements for large scale, high-volume production facilities ● Experience with ASRS (Automated Storage and Retrieval Systems) warehouse systems, AGV, conveyance, logistics, distribution, RFID and Material Flow Methods is highly desirable ● Experience with system integration to electronic warehouse and asset management systems(EWM/EAM) is highly desirable (preferably SAP) ● Experience designing greenfield facility layouts ● Project Management experience ● Passionate & committed self-starter with “can do” attitude, team player and taking responsibility to get the job done ● Ability to work independent with strong attention to detail and focus on efficiency, effectiveness and cost ● Ability to assess and solve complex issues and tackle problems with limited initial information. ● Intercultural and interdisciplinary communication skills; able to communicate effectively in English (verbal, written) ● Ability to communicate efficiently in Mandarin 【We offer】 ● Competitive compensation package ● Flexible hours and working from home policy. ● Modern working environment with state-of-the-art facilities and technologies ● Challenging assignments in a fast growing and innovative industry ● Position in a dynamic, international team of highly skilled professionals ● Various opportunities for personal and professional development within a global organization

【Job Overview】 This position is a senior technical role in the Molding Technology Group within our Global Operations Engineering team in Taiwan. 【Your responsibilities】 ● Lead and develop a team of experts to support the production of injection molded components for our autoinjector systems ● Understand current practices and develop new or improved scientific molding processes and methodologies based on in-depth processing experience, plastics engineering fundamentals and materials science knowledge. Promote use of new technologies and industry-leading trends. Provide highest level of technical expertise ● Lead engineering accountability for molds, component manufacturing and corresponding processes within our production system ● Collaborate closely with Plant / Production manager, tool makers and maintenance, quality and process development on performance/process improvements and trouble shooting ● Lead the development of improvement plans and requirements for capacity expansion and future mold generations and production setups ● Lead improvement programs and capacity deployment in injection molding ● Accountable for manufacturing acceptance of new molds in regular production ● Lead Design For Manufacturing (DFM) and definition of manufacturing requirements for new products and product care initiatives ● Organize and lead plant level training activities to improve molding problem solving capabilities and process efficiencies 【Your qualification】 ● Degree in Mechanical Engineering, Polymer Science or similar education/experience ● Minimum 15 years of relevant industry experience with hands-on experience with multi-cavity hot runner injection molding systems ● Deep understanding of mold and machine setup, molding machine operation, process optimization, as well as mold design/function. ● Thorough understanding and excellent hands-on experience with auxiliary equipment (i.e. Hot runners, controllers, Polymer dryers, Thermolator, Mold heaters, robot/take out systems, etc.). ● Advanced knowledge of engineering resin characteristics / validation of new polymer materials and molding processes for medical grade polymers. ● Statistical analysis knowledge, including an understanding of Scientific molding processes, the mold- machine- material- process interactions, Design of Experiments (DoE) and mold qualification protocols ● Advanced knowledge of common problem-solving and Root Cause Analysis (RCA) methodologies ● Proven track record in leading and developing a team of highly specialized experts; management experience ● Advanced knowledge in process development, verification and validation ● Passionate & committed self-starter with “can do” attitude, team player and taking responsibility to get the job done ● Previous exposure to a highly regulated industry (e.g. medical, pharmaceutical) and knowledge of relevant standards (e.g. ISO13485, cGMP) is a plus ● Intercultural and interdisciplinary communication skills; able to communicate effectively in English (verbal, written) ● Ability to communicate in Mandarin is highly desirable 【We offer】 ● Competitive compensation package ● Flexible hours and working from home policy. ● Modern working environment with state-of-the-art facilities and technologies ● Challenging assignments in a fast growing and innovative industry ● Position in a dynamic, international team of highly skilled professionals ● Various opportunities for personal and professional development within a global organization

【Job Overview】 This role is embedded in the Automation Technology Group within our Global Operations Engineering team in Taiwan. 【Your responsibilities】 ● Lead and develop a team of experts to support the production in high-speed assembly and packaging of our autoinjector systems ● Understand current practices and develop new or improved assembly processes, automation solutions and automated inspection methodologies based on in-depth processing experience, automation engineering fundamentals and equipment design knowledge. ● Promote use of new technologies and industry-leading trends. Provide highest level of technical expertise ● Lead engineering accountability for automated assembly and test equipment, device assembly and corresponding processes within our production system ● Collaborate closely with Plant / Production manager, automation vendors and maintenance, quality and process development on performance/process improvements and trouble shooting ● Lead the development of improvement plans and requirements for capacity expansion and future equipment generations and production setups ● Lead improvement programs and capacity deployment in device assembly and packaging automation ● Accountable for manufacturing acceptance of new assembly and test equipment in regular production ● Lead Design For Manufacturing (DFM) and definition of manufacturing requirements for new products and product care initiatives ● Organize and lead plant level training activities to improve assembly / automation problem solving capabilities and process efficiencies 【Your qualification】 ● Degree in Mechanical Engineering, Automation or similar education/experience ● Minimum 15 years of relevant industry experience; hands-on experience with high-speed automated assembly of plastic and metal components ● Deep understanding of equipment design, process automation and relevant sub-systems (pneumatic/electric actuators, cam-driven pick and place systems, optical/capacitive/inductive and other sensor technologies, servo-driven systems) ● Experience with commissioning, qualification and validation of large automation equipment and processes ● Thorough understanding and hands-on experience with Siemens and/or Beckhoff PLC based systems, common sensor and actuator system, and vision technologies ● Hands-on experience in programming PLC/IPC and SCADA is highly preferred ● Advanced knowledge of common problem-solving and Root Cause Analysis (RCA) methodologies ● Proven track record in leading and developing a team of highly specialized experts; management experience ● Passionate & committed self-starter with “can do” attitude, team player and taking responsibility to get the job done ● Previous exposure to a highly regulated industry (e.g. medical, pharmaceutical) and knowledge of relevant standards (e.g. ISO13485, cGMP) is a plus ● Intercultural and interdisciplinary communication skills; able to communicate effectively in English (verbal, written) ● Ability to communicate in Mandarin is a plus 【We offer】 ● Competitive compensation package ● Flexible hours and working from home policy. ● Modern working environment with state-of-the-art facilities and technologies ● Challenging assignments in a fast growing and innovative industry ● Position in a dynamic, international team of highly skilled professionals ● Various opportunities for personal and professional development within a global organization

【About Company】 SHL Medical AG, headquartered in Switzerland, is a world-leading solution provider designing, developing, and manufacturing advanced drug delivery systems with over 5,000 employees worldwide. Our customers include top pharmaceutical and biotech companies around the globe that require innovative devices such as auto-injectors or pen injectors to deliver their drugs effectively. 【Job Overview】 In Taiwan, SHL Medical is looking for a Service Desk Engineer as part of the Information Communication Technology Service Desk team. The responsibility of the Service Desk Engineer comprises the management and maintenance of Microsoft Windows client infrastructure. The position cooperates closely with end users, vendors, IT, Security, and business stakeholders. Together with business users and system owners, the Service Desk Engineer plans, proposes, and provisions client technical solutions that meet technical best practices and the company’s business goals. This role requires an energetic and self-motivated individual with excellent communication and organisational skills to work cross-functionally. 【Main Responsibilities】 • Act as the first point of contact for users seeking technical assistance over the ITSM ticketing system, phone or email • Assist users on identifying issues and requests and maintaining the tickets in IT Service Management system within SLAs • Lead troubleshooting and root cause analysis to effectively resolve issues and deliver sustainable solutions in collaboration with technical peers • Monitor client infrastructure health and keep track of their availability, performance, and responsiveness • Support in evaluation and purchasing of IT hardware/software solutions • Perform IT assest management • Work closely together with the Information Security organisation to enhance and improve security setups for client infrastructures • Strong organisational qualities to meet tight deadlines as well as coordinate, prioritise and communicate project status to all applicable parties • Help to grow a healthy, collaborative engineering culture in line with the company values 【Required Skills & Qualifications】 • Bachelor‘s degree, ideally in Computer Science or Information Systems • 1+ Years of IT related experience in the following technologies: o Microsoft Active Directory with Microsoft Azure Active Directory hybrid-join enviornment o Microsoft Windows clients (7, 10, 11) o Mutifunctional printers, office printers and label printers o Meeting room technologies (projector, TV, wireless presentation, AV, VC, room reservation terminal…etc) • Knowledge in Windows client performance analysis, including use of performance monitor or related tools to identify bottlenecks or resource issues • Knowledge of Windows networking technologies and use of diagnostic tools such as WireShark or Network Monitor to identify communication issues • Familiar with command lines or PowerShell scripts in automating operational processes • Computer certifications are a plus; especially Microsoft Windows or Cisco Networking • Good verbal and written communication in both English and Chinese are mandatory • Excellent communicator in a cross-functional team • A high level of autonomy in combination with a results-driven mindset

【About Company】 SHL Medical is a global leader in designing, developing, and manufacturing advanced drug delivery systems. With over 5000 employees worldwide, we provide innovative devices like auto injectors and pen injectors to top pharmaceutical and biotech companies globally. Headquartered in Switzerland since late 2018. Taiwan has been SHL’s starting ground in our bid for global mobility in the fields of drug delivery and medical technology. Our diverse and ambitious team shares a common goal of delivering the right drug devices for modern precision medicine. 【Department Introduction】 The Supply Chain department at SHL Medical consists of five teams: demand planning, procurement, logistics, shipping, and intelligence. We build a strong supply chain that prioritizes customer and supplier relationships across the entire value chain to meet customer demands effectively. 【Job Overview】 As part of the Procurement team at SHL, your responsibilities will include supplier management, sourcing strategy, price negotiation, contract management, and purchase management. You will oversee indirect procurement categories. 【Main Responsibilities】 1. Indirect Material Management: Oversee the procurement of indirect materials, including equipments, constructions, components and other factory or office supplies. 採購範疇：負責設備、工程、耗材及其它間接材料之採購。 2. Supplier Relationship Development and Management: Manage and cultivate relationships with suppliers to ensure effective collaboration and partnership. 開發及管理國內、外供應商。 3. Contract Negotiation: Negotiate with suppliers to secure favorable contract terms that align with organizational objectives. 與供應商協議採購之價格、折扣、出貨及付款等之最佳條件。 4. Contract Execution and Cost Savings: Implement and monitor agreed-upon contract terms with suppliers to achieve cost savings and optimize procurement outcomes. 根據合約執行採購條件以達成本效益。 5. Customer Requirement Alignment: Collaborate with other departments to align procurement activities with customer product requirements and ensure customer satisfaction. 與相關部門合作滿足客戶產品需求。 6. Sourcing Process Management: Lead the sourcing process for assigned commodities, including market analysis, supply strategy development, and supplier evaluation based on spend data analysis. 執行採購物件的市場資訊蒐集、供貨策略研究、供應商調查及歷史資料分析等採購流程。 7. Cross-Functional Collaboration: Collaborate with other departments to identify and implement improvement initiatives aimed at providing enhanced services across the organization. 根據改進的需求與其他部門合作，以提供更好的服務予整個集團。

SHL Medical is the world-leading solution provider in the design, development, and manufacturing of advanced drug delivery systems for the past 30 years with more than 5000 employees worldwide. Our customers include top pharmaceutical and biotech companies from around the globe that require innovative devices such as auto injectors or pen injectors to effectively deliver their drugs. Headquartered in Switzerland with sites in Sweden, Taiwan, and the Unites States. This position is a high-profile senior technical role in the within our Operations Engineering team in Taiwan. Your responsibilities ．Lead and develop a team of experts to support the production of our autoinjector systems ．Promote use of new technologies and industry-leading trends. Provide highest level of technical expertise ．Collaborate closely with Plant / Production manager, molding, maintenance and automation teams, quality and process development on performance/process improvements and critical event response ．Lead the development of improvement plans and requirements for capacity expansion and future production systems and processes ．Lead cross-functional improvement programs and capacity deployment projects in all relevant production areas (Intralogistics, Components, Assembly, Packaging/Printing) – both from a technical as well as from a project management perspective ．Lead Design for Manufacturing (DFM) and definition of manufacturing requirements for new products and product care initiatives ．Manage technology transfer (receiver function) of new products and processes into mass production Your qualification ．Advanced degree in Engineering, Applied Science or similar education/experience ．Minimum 10 years of relevant industry experience, ideally with roles across various functions – e.g. product/process development, production, quality/compliance ．Experience in at least three of the following areas: product development, process development, quality engineering, injection molding technology, process automation, metrology/sensor technology, process and system V&V, regulatory compliance Knowledge and experience in applying statistical analysis methodologies and tools, Design of Experiments (DoE). ．Advanced knowledge of common problem-solving and Root Cause Analysis (RCA) methodologies and proven track record in successfully applying these ．Proven track record in leading and developing a team of highly specialized experts; extensive technical project management experience ．Previous exposure to a highly regulated industry (medical, pharmaceutical) and knowledge of relevant standards (e.g. ISO13485, cGMP) ．Experience with commissioning, qualification and validation of large, complex automation equipment and production processes in general (manual and automated) ．Passionate & committed self-starter with “can do” attitude, team player and taking responsibility to get the job done ．Intercultural and interdisciplinary communication skills; able to communicate effectively in English (verbal, written) ．Ability to communicate effectively in Mandarin is highly desirable We offer ．Competitive compensation package ．Flexible hours and working from home policy. ．Modern working environment with state-of-the-art facilities and technologies ．Challenging assignments in a fast growing and innovative industry ．Position in a dynamic, international team of highly skilled professionals ．Various opportunities for personal and professional development within a global organization

SHL Medical is the world-leading solution provider in the design, development, and manufacturing of advanced drug delivery systems with more than 5000 employees worldwide. Our customers include top pharmaceutical and biotech companies from around the globe that require innovative devices such as auto injectors or pen injectors to effectively deliver their drugs. Headquartered in Switzerland since late 2018, with sites in Sweden, Taiwan, and the Unites States. This role is embedded in the Factory Development & Projects team within our Global Operations Engineering group in Taiwan. You are · Student in Engineering, Applied Sciences, Business Administration or Management · Independent thinker who is willing to discover new solutions off the beaten tracks · Previous experience / training in Project and/or Operations Management · Knowledge of common collaboration and productivity tools in MS O365 · Interest in Project Analytics, Continuous Improvement, Operations Management · Strong intercultural and interdisciplinary communication skills in English (spoken/written) · Diligent, reliable and target oriented team player · Knowledge of JavaScript, Python or VBA is a plus We offer · A variety of challenging internship opportunities across multiple products and disciplines within our Global Operations Engineering Team · The opportunity to solve real-world problems in a growing, future-proof industry · Competitive compensation, Labor and group insurance · Local HR support (Relocation and Accommodation as applicable) · Dedicated on-site senior mentor guidance · Asia-experience in a highly innovative, international company · Flexible work-from-home policy · Start date: flexible upon agreement

SHL Medical is the world-leading solution provider in the design, development, and manufacturing of advanced drug delivery systems with more than 5000 employees worldwide. Our customers include top pharmaceutical and biotech companies from around the globe that require innovative devices such as auto injectors or pen injectors to effectively deliver their drugs. Headquartered in Switzerland since late 2018, with sites in Sweden, Taiwan, and the Unites States. This role is embedded in the Molding Technology team within our Global Operations Engineering group in Taiwan. You are · Student in Engineering, Applied Sciences or other equivalent education · Independent thinker who is willing to discover new solutions off the beaten tracks · Interest in advanced high-volume production technologies, process improvement and medical manufacturing · Knowledge and/or previous experience in one or more of the following fields: Lean Manufacturing and Six Sigma methodologies, Polymer Science, Plastics Engineering, Injection Molding / Tooling Technology, Product Development, Process Development · Strong intercultural and interdisciplinary communication skills in English (spoken/written) · Diligent, reliable and target oriented team player We offer · A variety of challenging internship opportunities across multiple products and disciplines within our Global Operations Engineering Team · The opportunity to solve real-world problems in a growing, future-proof industry · Competitive compensation, Labor and group insurance · Local HR support (Relocation and Accommodation as applicable) · Dedicated on-site senior mentor guidance · Asia-experience in a highly innovative, international company · Flexible work-from-home policy · Start date: flexible upon agreement

SHL Medical is the world-leading solution provider in the design, development, and manufacturing of advanced drug delivery systems with more than 5000 employees worldwide. Our customers include top pharmaceutical and biotech companies from around the globe that require innovative devices such as auto injectors or pen injectors to effectively deliver their drugs. Headquartered in Switzerland since late 2018, with sites in Sweden, Taiwan, and the Unites States. This role is embedded in the Automation Technology team within our Global Operations Engineering group in Taiwan. You are · Student in Engineering, Applied Sciences or other equivalent education · Independent thinker who is willing to discover new solutions off the beaten tracks · Interest in advanced high-volume production technologies, process automation / robotics, control engineering, equipment design and medical manufacturing · Knowledge and/or previous experience in one or more of the following fields: Lean Manufacturing and Six Sigma methodologies, Process Automation, Digital Manufacturing/I4.0, Control Engineering, Equipment design, Robotics · Strong intercultural and interdisciplinary communication skills in English (spoken/written) · Diligent, reliable and target oriented team player We offer · A variety of challenging internship opportunities across multiple products and disciplines within our Global Operations Engineering Team · The opportunity to solve real-world problems in a growing, future-proof industry · Competitive compensation, Labor and group insurance · Local HR support (Relocation and Accommodation as applicable) · Dedicated on-site senior mentor guidance · Asia-experience in a highly innovative, international company · Flexible work-from-home policy · Start date: flexible upon agreement

SHL Medical is the world-leading solution provider in the design, development, and manufacturing of advanced drug delivery systems with more than 5000 employees worldwide. Our customers include top pharmaceutical and biotech companies from around the globe that require innovative devices such as auto injectors or pen injectors to effectively deliver their drugs. Headquartered in Switzerland since late 2018, with sites in Sweden, Taiwan, and the Unites States. This role is embedded in the Packaging and Forming Technology team within our Global Operations Engineering group in Taiwan. You are · Student in Engineering, Applied Sciences or other equivalent education · Independent thinker who is willing to discover new solutions off the beaten tracks · Interest in advanced high-volume production technologies, process improvement and medical manufacturing · Knowledge and/or previous experience in one or more of the following fields: Lean Manufacturing and Six Sigma methodologies, Packaging or Polymer Technology, Industrial printing processes (Pad, Screen, Laser), Packaging design · Strong intercultural and interdisciplinary communication skills in English (spoken/written) · Diligent, reliable and target oriented team player We offer · A variety of challenging internship opportunities across multiple products and disciplines within our Global Operations Engineering Team · The opportunity to solve real-world problems in a growing, future-proof industry · Competitive compensation, Labor and group insurance · Local HR support (Relocation and Accommodation as applicable) · Dedicated on-site senior mentor guidance · Asia-experience in a highly innovative, international company · Flexible work-from-home policy · Start date: flexible upon agreement

SHL Medical is the world-leading solution provider in the design, development, and manufacturing of advanced drug delivery systems with more than 5000 employees worldwide. Our customers include top pharmaceutical and biotech companies from around the globe that require innovative devices such as auto injectors or pen injectors to effectively deliver their drugs. Headquartered in Switzerland since late 2018, with sites in Sweden, Taiwan, and the Unites States. This role is embedded in the Packaging and Forming Technology Group within our Global Operations Engineering team in Taiwan. Possible location for this position: Taiwan You are · Student in Engineering, Applied Sciences or other equivalent education · Independent thinker who is willing to discover new solutions off the beaten tracks · Interest in advanced high-volume production technologies, process improvement and medical manufacturing · Knowledge and/or previous experience in one or more of the following fields: Lean Manufacturing and Six Sigma methodologies, Engineering components (springs, screws, etc.), Metal cold forming processes, Chemical cleaning processes · Strong intercultural and interdisciplinary communication skills in English (spoken/written) · Diligent, reliable and target oriented team player We offer · A variety of challenging internship opportunities across multiple products and disciplines within our Global Operations Engineering Team · The opportunity to solve real-world problems in a growing, future-proof industry · Competitive compensation, Labor and group insurance · Local HR support (Relocation and Accommodation as applicable) · Dedicated on-site senior mentor guidance · Asia-experience in a highly innovative, international company · Flexible work-from-home policy · Start date: flexible upon agreement

SHL Medical is the world-leading solution provider in the design, development, and manufacturing of advanced drug delivery systems with more than 5000 employees worldwide. Our customers include top pharmaceutical and biotech companies from around the globe that require innovative devices such as auto injectors or pen injectors to effectively deliver their drugs. Headquartered in Switzerland since late 2018, with sites in Sweden, Taiwan, and the Unites States. This role is embedded in the Factory Development & Projects team within our Global Operations Engineering group in Taiwan. You are · Student in Engineering, Applied Sciences or other equivalent education · Independent thinker who is willing to discover new solutions off the beaten tracks · Interest in advanced high-volume production technologies, process automation / robotics, control engineering, equipment design and medical manufacturing · Knowledge and/or previous experience in one or more of the following fields: Lean Manufacturing and Six Sigma methodologies, Process Automation, Digital Manufacturing/I4.0, Factory planning, Logistics, Plant simulation · Strong intercultural and interdisciplinary communication skills in English (spoken/written) · Diligent, reliable and target oriented team player · Knowledge of JavaScript, Python or VBA is a plus We offer · A variety of challenging internship opportunities across multiple products and disciplines within our Global Operations Engineering Team · The opportunity to solve real-world problems in a growing, future-proof industry · Competitive compensation, Labor and group insurance · Local HR support (Relocation and Accommodation as applicable) · Dedicated on-site senior mentor guidance · Asia-experience in a highly innovative, international company · Flexible work-from-home policy · Start date: flexible upon agreement

【About us】 SHL Medical is a world-leading solution provider in the design, development and manufacturing of advanced drug delivery systems with more than 5000 employees worldwide. Our customers include top pharmaceutical and biotech companies from around the globe that require innovative devices such as auto injectors or pen injectors to effectively deliver their drugs. Headquartered in Switzerland since late 2018. 【Job Overview】 We are looking for a Senior MS Power BI / Analytics and Reporting Expert who can turn raw data into valuable insights for the business. In this role, you will help realizing our analytics and reporting needs using MS Power BI and design state of the art dashboard, reports and analytics capabilities for better process performance and process. You shall analyse and articulate business needs (IT’s internal customers) and architect / implement solutions based on MS Power BI in accordance with the requests and in coordination with the SHL data strategy and its data models. You will be a member of the global Data / Analytics and Reporting team. Before realising a request, a thorough analysis should be made if MS Power BI or SAP SAC should be used to satisfy the individual demand. Finally, you shall provide trainings and second level support to the key users. 【Main Responsibilities】 。Architect, design, and implement the solution along the global enterprise business intelligence strategy and architecture based on MS Power BI. In tight cooperation with the business stakeholder, the application teams and the data/analytics and reporting team members, globally. 。Transform requirements, functional specifications and use cases into ETL/ELT processes, data models, reports and dashboard with MS Power BI. 。Support, coach and train the business departments in growing their Power BI self service capabilities. 。Partner with the different IT teams to further enhance the analytics and reporting capabilities within SHL utilizing also new technologies and innovations. 。Be an integrated member to increase data-quality, -governance and -security within SHL. 。Collaborate with data engineers, data scientist and other stakeholders to ensure data availability and quality of the solutions. 。Coordinate and manage the MS Power BI demand according to the SHL project mgmt. standards. 。Cooperate with the IT architecture team in constantly reviewing the analytics and reporting solutions footprint to lower complexity, improve efficiency and operational reliability. 。Maintenance and support of Power BI reports and dashboards 【Required Skills & Qualifications】 。BS or MS degree in computer science, management information system, statistics, or related fields (or equivalent experience). 。Experience in MS Power BI, Analysis for Office, and good working knowledge. Other reporting and data analytics capabilities, especially SAP are beneficial. 。5+ years of hands-on experience in BI development based on MS Power BI. 。Expert knowledge of ETL/ELT and data modeling. 。5+ years of experience with Microsoft SQL. DBA experience is an advantage. 。Experience in SAP Analytics Cloud (SAC), SAP BW4/HANA and good working knowledge on other reporting and data analytics is an advantage. 。Experience with Azure platform with the following services: Azure SQL, Azure Data Factory, Azure Data Lake, Azure Synapse is an advantage. Motivation to develop further in these areas. 。Excellent interpersonal and facilitation skills, with a proven ability to work with diverse professionals from multiple disciplines across all levels of seniority. 。Project management skills 。Excellent organizational skills with great attention to detail. 。Experience working in multi-cultural team. 。Fluent in both mandarin Chinese and English. Sound communication and presentation skills.

『福』吃得美味幸福；『勝』吃得好運勝利。我們希望每位客人吃了福勝亭的美味豬排後，都可以有幸運幸福的感覺~ ⭐️完善的教育訓練與明確的升遷管道 ⭐️提供多元發展機會，最快一年可晉升店長 ⭐️高額業績獎金，等您來挑戰! 【工作內容】 1.製作美味餐點，提供給顧客享用 2.提供客人專業、即時的服務 3.維持乾淨衛生的用餐環境 4.門市收銀及當日帳款結清 5.現場庫存盤點與叫貨 ❤️【你可以享有】 ✤三節禮金(劵)、員工分紅、年終獎金、業績達標獎金 ✤勞保、健保、勞退提撥、團體保險 ✤員工餐、生日餐劵 ✤年度尾牙活動 ✤年度健康檢查 【升遷管道】 儲備幹部→店務助理→儲備店長→店長→資深店長→區域督導 更多資訊請至福勝亭官網:http://www.tonkatsu.com.tw/

【三商巧福，回味無限】 遙想巧福當年，一碗牛肉麵，香氣四溢 開滿半個台灣，是你的是我的，三商巧福 ⭐️營業時間內，彈性排班! ⭐️通過不同工作站考核即可調薪! 【工作內容】 1.餐點製作 2.顧客服務 3.環境清潔 4.門市收銀 ❤️【你可以享有】 ✤勞保、健保、勞退提撥、團體保險 ✤員工優惠餐、生日餐劵 ✤三節禮金(券) ✤年度尾牙活動 ✤年度健康檢查 【工作時間】 早班時段:1000-1400 晚班時段:1700-2200 彈性排班4-8小時 更多資訊請至三商巧福官網:https://www.3375.com.tw