實習甘苦談專區

# Manage customer complaints and ensure timely resolution. # Prepare and manage 8D reports and corrective actions. # Investigate and resolve quality issues. # Coordinate and support customer audits. # Drive continuous quality improvement initiatives. # Lead the resolution of major quality issues, customer complaints, and quality risk incidents related to Customer Service (CS), including root cause analysis, decision-making, corrective actions, and follow-up to ensure effective problem resolution. # Handle urgent quality incidents by providing timely recommendations and reporting to management, minimizing quality risks and operational impacts. # Coordinate cross-functional resources to drive quality improvement projects and resolve critical quality issues, ensuring projects are executed according to plan and achieve expected objectives. # Plan, chair, and participate in quality-related meetings, presenting quality performance, improvement results, and project progress to management and customers. # Manage customer complaints, investigate material quality issues, conduct quality system audits, and support customer audits as part of overall quality assurance activities. # Plan and implement continuous improvement initiatives to enhance product quality, manufacturing process capability, and customer satisfaction. # Must be willing to travel frequently overseas to support customer service requirements, including visits to automotive customers in Brazil, Germany, Italy, the United States, and other regions in Europe and North America. # Perform other quality management duties and assignments as delegated by supervisors.

1.擔任產品開發主擔當及對應車廠需求 2.開發件之量產圖出圖和相關資料作成、整理 3.產件之不良點分析及改善對策 4.工程上相關問題之支援 5.主管交辦事項 # 設計開發 a).PCB Layout確認 b).產品開發硬體設計驗證。 c).產品產線及技術轉移 # 異常品分析 a)車廠實驗要求問題對策 b).產線不良點分析及改善對策 c).客訴部品協助品質部分析 d).工程上相關問題之支援 # 文件製作 a).APQP相關開發文件製作(DFMEA、製造流程圖、CC&SC) b).擔當開發件之APQP、PPAP和工作進度整合 # 實車安裝及測試 a).配合車廠各階段進行實車安裝 b).配合車廠各階段進行實車確認及驗證 # 樣品製作 a).產品焊接、樣品製作。 b).初期階段樣品製作 c).擔當開發件之各生產用治/手/耐久 測具設計製作(首樣)與指導。 d).標準樣品製作 # 技術支援 a).協助高級工程師工作。 b).工作需必要時，可配合加班。 c).配合客戶需求，國內外出差對應。 d).主管臨時交付事項 # 零件承認 a).新零件規格功能確認、驗證 b).新零件承認書確認發行 c).供應商新產品介紹及確認

#Job Summary -Development of automotive mmWAVE Radar or Ultrasonic sensor circuit design, layout, testing, and troubleshooting -Electronic circuit design, layout review, EMC (Electromagnetic Compatibility) testing, and troubleshooting -Prototyping production and introduction to mass production -Product performance verification and regulatory certification -Willingness to travel internationally at least twice per year to the United States, Europe (Germany, Italy, etc.), or other countries where major automakers are headquartered. #General Job Requirements: -Promotion of new products within the group (proposal, demo) -Maintenance of existing products and customer relationships -Tasks assigned by the supervisor -Provide technical support to responsible clients #(Tier 1) Professional Job Requirements: -Take responsibility to the assigned development project -Collection and organization of data related to global regulations, automaker standards, and corporate guidelines -Prepare documents following development standards such as ISO 26262, ISO 21434, ASPICE, etc. -Development of new technologies and creation of related technical documents -Verification of developed technologies through theory, simulation platforms, or real vehicle testing -Support for DV (Design Validation) or PV (Product Validation) experiments -Patent proposals -Collection and organization of industry information #Annual evaluation (tied to annual KPIs) -Understanding of regulations and automaker standards -Improvement of professional technical knowledge -Understanding of the group’s products #Design and development -Collaborating with engineering teams, including antenna engineers, to optimize circuit design, product assembly, heat dissipation, and electromagnetic effects. -Simulation analysis and problem-solving for electronic hardware designs -Verification testing and measurement reports for electronic hardware designs -Solving SI(signal Integrity) and PI(Power integrity) issues and ensuring compliance with customer‘s EMC (Electromagnetic Compatibility) standards. -Designing and producing testing equipment for testing, validation and production. -Searching and validating new electronic materials -Supporting quality issues analysis and design improvement #Failure or Quality analysis Development Phase: -Troubleshooting system failures -Identify and resolve system issues Production Phase: -Collecting and addressing customer complaints -Providing post-production support to customers #Document production -Writing technical specification documents for electronic hardware products -Preparing and updating Bill of Materials (BOM) documentation and managing inventory through the company‘s management system -Preparation of development documents, including production-ready diagrams and related materials -Compliance with system standards (e.g. ISO26262) #Prototyping -DUT preparation for demo/testing #Technical support -Remote/ On site support for end customer or 3rd parties involved in the project. -Remote/ On site supports internal TTE group for training or technology transfer. #Expertise -Circuit design, Layout, SI/PI, EMC #Technical Skills -OrCAD/Pads/Altium Designer…

#Job Summary -Development of automotive electronics (Sensor or ECU) mechanical design. -The job responsibilities include selecting injection-molded plastic materials, reviewing outsourced mold quality, establishing environmental testing specifications, inspecting and accepting molds and finished products, and conducting preliminary process design (in collaboration with the production engineering team). -Prototyping production and introduction to mass production -Product performance verification and regulatory certification -Willingness to travel internationally at least twice per year to the United States, Europe (Germany, Italy, etc.), or other countries where major automakers are headquartered. #General duties General Job Requirements: -Promotion of new products within the group (proposal, demo) -Maintenance of existing products and customer relationships -Tasks assigned by the supervisor -Provide technical support to responsible clients #(Tier 1) Professional Job Requirements: -Take responsibility to the assigned development project -Collection and organization of data related to global regulations, automaker standards, and corporate guidelines -Prepare documents following development standards such as ISO 26262, ISO 21434, ASPICE, etc. -Development of new technologies and creation of related technical documents -Verification of developed technologies through theory, simulation platforms, or real vehicle testing -Support for DV (Design Validation) or PV (Product Validation) experiments -Patent proposals -Collection and organization of industry information Annual evaluation (tied to annual KPIs) -Understanding of regulations and automaker standards #Design and development -Collaborating with engineering teams, including antenna engineers, to optimize circuit design, product assembly, heat dissipation, and electromagnetic effects. -Simulation analysis and problem-solving for electronic hardware designs -Verification testing and measurement reports for electronic hardware designs -Designing and producing testing equipment for testing, validation and production. -Searching and validating new materials -Supporting quality issues analysis and design improvement #Failure or Quality analysis: Development Phase: -Troubleshooting system failures -Identify and resolve system issues Production Phase: -Collecting and addressing customer complaints -Providing post-production support to customers #Document production: -Writing technical specification documents for electronic hardware products -Preparing and updating Bill of Materials (BOM) documentation and managing inventory through the company‘s management system -Preparation of development documents, including production-ready diagrams and related materials -Compliance with system standards (e.g. ISO26262) #Prototyping: -DUT preparation for demo/testing #Technical support: -Remote/ On site support for end customer or 3rd parties involved in the project. -Remote/ On site supports internal TTE group for training or technology transfer. #Expertise: Experience in designing ultrasonic sensors, image sensors, or millimeter-wave radar sensors is required. #Technical Skills: -AutoCAD (must) -CATIA, Siemens NX (choose one) -SolidWorks (optional)

#Job summary • We are seeking a talented Camera Image Quality Engineer to join our Camera Systems team at TTE. We welcome candidates from entry-level, senior, and staff levels for this exciting opportunity. • As a key member of our team, you will be responsible for the entire camera lifecycle, encompassing sensor selection, lens development, camera module design, quality control monitoring, camera calibration, image quality assessment, and camera tuning. • Willingness to travel internationally at least twice per year to the United States, Europe (Germany, Italy, etc.), or other countries where major automakers are headquartered. • If you have a passion for camera technology and image quality, we want to hear from you! Our ideal candidate will have a strong foundation in camera systems engineering, with expertise in image processing, sensor technologies, and manufacturing quality assurance. #General Job Requirements: -Promotion of new products within the group (proposal, demo) -Maintenance of existing products and customer relationships -Tasks assigned by the supervisor -Provide technical support to responsible clients #(Tier 1) Professional Job Requirements: -Take responsibility to the assigned development project -Collection and organization of data related to global regulations, automaker standards, and corporate guidelines -Prepare documents following development standards such as ISO 26262, ISO 21434, ASPICE, etc. -Development of new technologies and creation of related technical documents -Verification of developed technologies through theory, simulation platforms, or real vehicle testing -Support for DV (Design Validation) or PV (Product Validation) experiments -Patent proposals -Collection and organization of industry information #Annual evaluation (tied to annual KPIs) -Understanding of regulations and automaker standards -Improvement of professional technical knowledge -Understanding of the group’s products #Design and development -Tuning parameters for 3A (AE/AF/AWB) and ISP (Image Signal Processor) -Improving the calibration process and methods -Enhancing pre-calibration software and hardware check procedures -Improving the efficiency of using adaptation tools -Camera module EEPROM configuration -Camera module testing, analysis & reporting -Introducing new camera modules to factory line -Setting up image quality test facility #Failure or Quality analysis Development Phase: -Troubleshooting system failures -Identify and resolve system issues Production Phase: -Collecting and addressing customer complaints -Providing post-production support to customers #Document production -Preparation of development documents, including production-ready diagrams and related materials -Compliance with system standards (e.g. ISO 26262) -Documentation on processes or development activities #Prototypin -DUT preparation for demo/testing #Technical support -Remote/ On site support for end customer or 3rd parties involved in the project. -Remote/ On site supports internal TTE group for training or technology transfer. #Expertise: -Must have knowledge of image-related topics, including image sensors, image quality, calibration, and camera modules. #Technical Skills: -Must have excellent English communication skills (required). Fluency in another second language is optional. -Ability to read and understand contact image sensor (CIS) specifications from leading manufacturers such as Sony, OV, ON-Semi. -Must be familiar with laboratory instruments and have excellent skills in image quality (IQ) testing. -Familiar with image quality analysis software (Imatest)

#Job summary: -As a key contributor, you will work on embedded software development using C/C++ in RTOS environments, supporting vehicle network protocols (CAN, CANFD, LIN, Ethernet) and AUTOSAR/QNX-based platforms. You will collaborate closely with cross-functional teams across hardware, mechanical, and system engineering to deliver production-ready software that meets automotive industry standards including ASPICE, ISO 26262, and ISO 21434. -Willingness to travel internationally at least twice per year to the United States, Europe (Germany, Italy, etc.), or other countries where major automakers are headquartered. -We are looking for an experienced Embedded Software Integrator to join our Automotive R&D team at TTE. This role is responsible for integrating and validating embedded software for automotive electronic control units (ECUs) and sensor systems. #General duties: -Promotion of new products within the group (proposal, demo) -Maintenance of existing products and customer relationships -Tasks assigned by the supervisor -Provide technical support to responsible clients #(Tier 1) Professional Job Requirements: -Take responsibility to the assigned development project -Collection and organization of data related to global regulations, automaker standards, and corporate guidelines -Prepare documents following development standards such as ISO 26262, ISO 21434, ASPICE, etc. -Development of new technologies and creation of related technical documents -Verification of developed technologies through theory, simulation platforms, or real vehicle testing -Support for DV (Design Validation) or PV (Product Validation) experiments -Patent proposals -Collection and organization of industry information #Failure or Quality analysis -Development Phase: Troubleshooting system failures Identify and resolve system issues -Production Phase: Collecting and addressing customer complaints Providing post-production support to customers #Document production -Preparation of development documents, including production-ready diagrams and related materials -Compliance with system standards (e.g. ASPICE, ISO26262, ISO21434) -Documentation on processes or development activities #Prototyping -Technical support #Technical support -Remote/ On site support for end customer or 3rd parties involved in the project. -Remote/ On site supports internal TTE group for training or technology transfer. [Technical Skills] -C/C++ programming language -Vehicle network (CAN, CANFD, LIN, ethernet) -RTOS -Embedded System Development -Familiar with AutoSAR/QNX development

# Lead and manage the task assignment, project progress, and performance of mechanical design engineers. # Review mechanical design drawings, including 2D/3D part drawings and approval drawings. # Oversee mechanical testing, prototype evaluation, and validation through actual vehicle installation. # Coordinate mold development with suppliers, including mold design review, trial molding, final completion, and approval release. # Lead the resolution of technical issues raised by customers and suppliers and develop effective corrective actions. # Conduct root cause analysis and develop corrective and preventive actions (CAPA). # Establish departmental systems and processes and drive the achievement of departmental goals. # Perform other duties and projects assigned by management. 1.產品機構設計工程師之任務分配、進度追蹤、成效確認 2.機構圖面設計審查(包含2D、3D零件圖及承認圖) 3.產品機構相關測試、試作、實車試裝確認 4.模具廠開模檢討、試模至開模完成，承認發行 5.處理客戶端及協力廠商問題對應及改善對策之解決能力 6.異常分析及改善對策擬定 7.制度建立及部門目標執行 8.其他主管交辦事項

1. 孰悉CAN/LIN通訊及相關量測工具。 2. 具量產導入. 供應商管理或客戶技術對應經驗。 3. 具備類比.數位及電源電路相關知識。 4. Datasheet與技術文件閱讀能力。 5. 具備電路分析. 問題釐清及實驗驗證能力。 6. 具備EMC/EMI/ESD/ISO-7637或車用法規相關經驗與對策能力。 7. 能與軟體.硬體.機構.品保.製造單位協同作業。

1.開發與維護 CAN、LIN、UART、I2C、SPI 等通訊功能。 2.負責 MCU 周邊控制，例如 GPIO、ADC、PWM、Timer、Interrupt、Watchdog、Flash / EEPROM 等。 3.協助 Bootloader、Flash Programming、DTC、Fail-safe、診斷功能或 EOL 測試功能開發。 4.參與樣品測試、Debug、實車測試、EMC / 環境測試與問題分析。 5.與硬體、機構、測試、品質、生產及供應商合作，完成產品開發與量產導入。 6.協助客戶需求分析、設計變更、量產問題、8D 分析與改善對策。

1.具SMT線管理經驗。 2.掌握常用辦公軟體（WODR/EXCEL/OUTLOOK）、SAP系統的使用。 3.具備較強的溝通與協調能力。

1.具 8 年以上電子產品開發經驗，其中 3 年以上團隊管理或專案管理經驗。 2.具硬體、軟體、機構、測試或系統整合其中一項專長，並能跨領域協調。 3.熟悉車用電子產品開發流程、設計驗證、量產導入與客戶技術對應。 4.具備問題分析能力，可運用 8D、FMEA、FTA、Is / Is Not、5Why 等方法推動改善。 5.具跨部門溝通、時程管理、風險管理與供應商協調能力。 6.可閱讀英文規格書、Datasheet、測試報告，並能進行基本英文技術溝通。

1. 車用安全開發流程推動與維護 2. 協助軟/韌體開發、設計、測試驗證 3. 客戶需求文件準備及對應 4. 領導團隊進行專案相關事項支援與管理(管理3人以下) 5. 主管交辦事項

1. 負責品質工程(QE)團隊之管理，統籌客戶品質(CS)、供應商品質(SQE)、品質系統(QS)及實驗室(Lab)等相關業務之規劃、管理及績效提升。 2. 主導重大品質異常、客戶抱怨及品質風險事件之分析、決策及改善追蹤，確保問題獲得有效解決。 3. 處理部門緊急品質事件，提供即時決策與管理階層回報，降低品質風險及營運影響。 4. 協調跨部門資源，推動品質改善專案及重大品質議題，確保專案依計畫執行並達成預期目標。 5. 規劃、主持及參與品質相關會議，向管理階層及客戶報告品質績效、改善成果及專案進度。 6. 領導實驗計畫、客戶抱怨處理、材料異常分析、品質系統稽核及客戶稽核等品質活動，提供技術指導及決策支持。 7. 推動品質管理系統之維護、持續改善及品質文化建立，提升組織整體品質績效。 8. 規劃持續改善專案，提升產品品質、製程能力及客戶滿意度。 9. 擔任品質部門主管代理人，於主管差旅或不在職期間代理部門管理及相關決策事項。 10. 執行主管交辦之其他品質管理及組織發展相關工作。

1.具備工廠廠務及總務事務處理之相關經驗。 2.維護廠務系統及庶務性事務作業可正常運作。 3.統籌管理維護建築物公共安全、消防安檢、設備維護(水/電力/空調/消防/門禁/監視系統…等)、廠區環境清潔、水電維修、公務車輛管理、電信郵務、年節祭祀、園藝維護...等業務。 4.庶務性及雜項採購事務處理。 5.主管交辦事項。

01. 部門願景領導,制度建立 02. 部門目標執行 03. 員工溝通及績效制定及考核 04. 研發/開發案(或專案)之管理 05. 跨部門溝通協調 06. 負責新產品開發專案的軟韌硬體/演算法/機構之整合規劃 07. 負責評估新技術的發展方向及新技術的研究發展
 08. 負責規劃新項目汽車電子產品技術的開發工作 09. 系統架構建置與周邊模組整合、程式設計與編譯、產品異常分析、專案管理 10. 研發/開發案(或專案)管理:研發/開發案(或專案)之任務推動、分配、指導、審查,提供適當資源以完成任務 11. 研發/開發案(或專案)之任務進度追蹤、個階段成效確認 12. 主管交辦事項

1. SMT線參數DOE驗證、CPK數據彙整、追蹤 2. SMT線SOP、PFMEA、CP文件撰寫、維護 3. SMT線進行動作優化及效率工時及良率分析改善 4. 產線產品不良分析、短/長期對策施做、跟進 5. 客戶不良品分析、8D報告撰寫 & 改善對策跟進預落實 6. 與RD討論產品規格、與廠商討論設備規格 7. 新開案全系列產品需求進行半/SMT線各單元設備規格評估. 8. 輔助設備工程師與設備商討論動作原理、驗證、測試…等項目 9. SMT線周邊量測儀器評估. 10. 配合產品專案短期海外出差技轉 11. 職等職稱依學經歷及能力核給

1. 協助業務對於商品價格的查詢及報價相關的問題。 2. 負責部門相關文件之整理，建檔以及追蹤，於有效時間內回覆顧客信件。 3 完成業務主管其他交辦事項。 4. 協助業務人員處理銷售業務相關之公司內部行政作業及對外相關會議與會。 5. 主管交辦事宜或部門後勤支援。

1. 製造部所有生產規範及作業標準文件簽核。 2. 製造部產線所有電子系統文件簽核。 3. 生產設備及生產輔助材料請購作業之審核。 4. 製造部經營會議各股資料審核。 5. 製造部產線客戶稽核對應及稽核缺失對策回覆審核。 6. 製造部產線經營指標管理。 7. 負責召集及主持部內會議。 8. 經營指標與人事預算制訂。 9. 代理製造部經理工作,參與外部會議及跨部門協調。 10. 部內人力調度及管理。 11. 製造部年度預算編列、審核。 1. Approval of all production specifications and operating standard documents in the Manufacturing Department. 2. Approval of all electronic system documents for the production lines in the Manufacturing Department. 3. Review of purchase requisitions for production equipment and auxiliary materials. 4. Review of departmental data for the Manufacturing Department‘s management meetings. 5. Response to customer audits of the production lines in the Manufacturing Department and approval of corrective actions for audit discrepancies. 6. Management of operational indicators for the production lines in the Manufacturing Department. 7. Responsible for convening and presiding over internal departmental meetings. 8. Development of operational indicators and personnel budget. 9. Acting as the Manufacturing Department Manager, participating in external meetings and cross-departmental coordination. 10.Internal manpower scheduling and management. 11. Preparation and review of the annual budget for the Manufacturing Department.

1.依年度稽核計畫執行內部稽核作業，進行營運、財務、法遵及內部控制相關查核。 2.獨立規劃並執行查核程序，包括流程訪談、文件審閱、抽樣測試、資料分析、異常追查及現場查核。 3.評估內部控制制度之設計及執行有效性，辨識流程缺失與潛在風險，並就控制設計、作業流程及制度文件提出改善建議，協助相關單位釐清及完善內控制度內容。 4.撰寫稽核底稿及報告，提出具體且可執行之改善建議。 5.與受查單位溝通稽核發現及改善建議，協助推動改善措施落實。 6.追蹤稽核缺失改善進度，確認改善措施之適當性與執行成效。 7.配合公司需求執行海外子公司或營運據點之查核作業。 8.辦理依法令規定之內部稽核相關公告、申報作業。 9.其他主管交辦工作事項。

1. 半/自動組裝線參數DOE驗證、CPK數據彙整、追蹤 2. 半/自動組裝線SOP、PFMEA、CP文件撰寫、維護 3. 半/自動組裝線進行動作優化及效率工時及良率分析改善 4. 產線產品不良分析、短/長期對策施做、跟進 5. 客戶不良品分析、8D報告撰寫 & 改善對策跟進預落實 6. 與RD討論產品規格、與廠商討論設備規格 7. 新開案全系列產品需求進行半/自動組裝線各單元設備規格評估. 8. 輔助設備工程師與設備商討論動作原理、驗證、測試…等項目 9. 半/自動組裝線周邊量測儀器評估. 10. 配合產品專案短期海外出差技轉 1.Process Validation: Conduct DOE (Design of Experiments) for semi/fully automated assembly line parameters; compile and track CPK (Process Capability Index) data. 2.Technical Documentation: Author and maintain SOP (Standard Operating Procedures), PFMEA (Process Failure Mode and Effects Analysis), and CP (Control Plan) documentation. 3.Optimization & Efficiency: Perform motion studies and optimization to improve cycle time, labor efficiency, and yield rates. 4.Defect Analysis: Analyze production line defects and implement/track short-term and long-term corrective actions. 5.Quality Management: Conduct failure analysis on customer returns (RMA), author 8D Reports, and ensure the implementation of improvement measures. 6.Cross-functional Communication: Collaborate with RD on product specifications and negotiate equipment specifications with vendors. 7.Equipment Evaluation: Evaluate unit-level equipment specifications for semi/fully automated lines based on new project requirements across all product series. 8.Engineering Support: Assist equipment engineers in discussing operating principles, validation protocols, and testing procedures with vendors. 9.Metrology Assessment: Evaluate peripheral measurement instruments and gauging systems for assembly lines. 10.Global Support: Execute short-term overseas business trips for technology transfer (TT) in coordination with specific product projects.