成大專區
Job Duties and Responsibilities (Technical and Operational) 1. Responsible for HVM Fab sales activities including revenue commits and delivery, building customer trust and installed base management (escalation, contract performance, CoC and productivity). 2. Provide accurate sales forecasts and update regularly regarding to change of prior plan. Issue quotation, Configuration and NSR (Non-Standard Requirement) for proper configuration and system slotting 3. Developing and executing strategies and actions for account team key application defense and penetration. To gain market share, and profitability. 4. Understanding Internal & External customers‘ needs and to build a strategic & sustainable relationship with them. 5. Serve as the primary Lam person regarding TSMC product/Business details and explanation, handling appropriate paperwork pertaining to Sales and delivery, and final negotiations. 6. Regular collaboration/coordination with Account‘s Sales/Process/Service Team in order to review status and plans to ensure an organized and efficient approach to penetration and installed base success to ensure Customer Trust activities. 7. Coordinate specific installation and process acceptance schedules with CSOM for timely system acceptance and manufacturing readiness.
Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership 1. May Provide on-site instruction to sub-contractors and customers. Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site.
Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site
Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision 8. Perform other related duties as assigned by senior FSE / supervisor Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site
1. High travel rate: 70~75% of the time, including international travels. 2. Comply with all safety procedures and demonstrate safety consistently as a value. 3. Complete the installation by consistent result with specified cycle times. Control the spending within budget. Train the local engineer to have same knowledge and skills. 4. Perform all standard installation activities from system move-in (Tier0), hardware setup (Tier1), process tuning (Tier2) independently. 5. Be able to run upon shift model as needed and perform routine preventative maintenance within established timeframes. Complete quality repairs. 6. Plan assimilation & Training: Train ramping operations (SOP, EHS), product knowledge assimilation, and conduct cross-product training during off-ramping. 7. Organize startup lesson learn with overall account team. 8. Work with site management to drive the MFG (manufacturing) quality improvement plan. 9. Diagnose and resolve technical problems. Use training and experience to identify process and software or hardware related system problems. 10. Assume responsibility to follow customer ground rules, regulations, and for complete customer satisfaction within work area. Assist in planning, communicating, and coordinating the installation plans with customer. 11. Respond to fab issues by communicating with other engineers and participating in escalation conference calls. Apply diagnostic techniques, using of documentation, and test equipment with assistance from senior engineer. May participate in projects to reduce costs and increase uptime.
We are looking for a talented Senior Engineer ( with EOS, DV, DVP or Sabre3D experience will be great) to become a part of our Global Flexible Workforce Team. 1. High travel rate: 75% of the time, including international travel (could over 50%). 2. Comply with all safety procedures and demonstrate safety consistently as a value. 3. Complete the installation by consistent result with specified cycle times. Control the spending within budget. Train the local engineer to have same knowledge and skills. 4. Perform all standard installation activities from system move-in (Tier0), hardware setup (Tier1), process tuning (Tier2) independently. 5. Be able to run upon shift model as needed and perform routine preventative maintenance within established timeframes. Complete quality repairs. 6. Plan assimilation & Training: Train ramping operations (SOP, EHS), product knowledge assimilation, and conduct cross-product training during off-ramping. 7. Organize startup lesson learn with overall account team. 8. Work with site management to drive the MFG (manufacturing) quality improvement plan. 9. Diagnose and resolve technical problems. Use training and experience to identify process and software or hardware related system problems. 10. Assume responsibility to follow customer ground rules, regulations, and for complete customer satisfaction within work area. Assist in planning, communicating, and coordinating the installation plans with customer. 11. Respond to fab issues by communicating with other engineers and participating in escalation conference calls. Apply diagnostic techniques, using of documentation, and test equipment with assistance from senior engineer. May participate in projects to reduce costs and increase uptime.
【招募職缺】 設備工程師|Field Service Engineer • 電機/機械/航太 / 自動控制 等相關理工科系學士或碩士畢業 • 對半導體產業及設備工程職務具高度興趣 • 需有機械相關的基礎知識 有半導體製程知識者尤佳 • 需有問題解決、溝通表達、團隊精神、主動學習等能力 • 需能配合大多數工作時間內,穿著無塵衣且將在無塵室環境中工作 ______________________ 【面試資訊】 • 活動日期:3/28(六) • 活動時間:上午場 09:00–12:00|下午場 13:00–16:00 • 活動地點:台南 • 工作地點:台南/高雄 ※ 3/28場次優先招募台南/高雄職缺。錄取後需配合公司安排在這兩個地區工作,若對於這兩個地區有意願再請投遞履歷。 ______________________ 【活動亮點】 • 與部門主管及 HR 現場面對面交流 • 深入了解美商半導體設備商的實際工作內容、值班模式與員工福利 ______________________ 【招募流程】 • 第一階段|履歷投遞與英文能力評估,若無英文成績單需參加線上英文測驗 • 第二階段|由用人主管進行履歷審核,若審核通過者將於 2 週內安排電話面談 • 第三階段|通過審核後,提交制式工作申請表,將發送活動邀請 • 招募面談|3/28(六) 參與F2F招募活動,現場與主管進行面試
機電繪圖員主要協助空調、水電、機電工程之圖面繪製、修改、套圖及竣工圖整理,並配合工程師及現場人員確認施工需求、圖面版本及現場調整事項。此職務會接觸工程圖說、施工圖、管線配置、設備位置、材料尺寸及施工界面,適合熟悉 AutoCAD 操作,並希望累積空調、水電、機電工程實務經驗的人員。 工作內容 1. 依據工程圖說、設計資料及現場需求,協助繪製空調、水電、機電相關施工圖、配置圖及竣工圖。 2. 使用 AutoCAD 或相關繪圖軟體進行圖面繪製、修改、套圖、標註及版本整理。 3. 協助工程師檢視圖面內容,確認管線路徑、設備位置、尺寸標註及施工界面是否清楚。 4. 依現場回報或工程師指示,協助修正施工圖面,並維護圖面版本正確性。 5. 協助整理工程圖說、材料設備型錄、送審資料、施工照片及相關工程文件。 6. 配合工程進度,協助提供現場施工所需圖面資料,並協助追蹤圖面修正事項。 7. 與工程師、現場主管、內業人員及協力廠商配合,確認圖面資料與現場施工需求一致。 8. 協助製作竣工圖、數量統計、管線配置資料及工程結案相關圖面文件。 9. 依公司及專案需求,完成主管交辦之繪圖、文件整理及工程資料支援事項。 我們期待的人 1. 熟悉 AutoCAD 基本操作,具工程圖面繪製或修改經驗者佳。 2. 具空調、水電、機電、建築或營建相關圖面經驗者佳。 3. 能理解基本圖面標註、尺寸、比例及圖層管理概念。 4. 做事細心、有責任感,能配合工程進度完成圖面修改及文件整理。 5. 願意與工程師及現場人員溝通,依實際施工需求調整圖面內容。 6. 熟悉 Microsoft Office 基本文書作業者佳。 7. 相關科系畢業、具繪圖經驗或願意學習機電工程實務者,皆歡迎加入。
機電工地主任主要負責空調、水電、機電工程現場管理與施工協調,需依工程圖說、契約內容、施工規範及工地實際狀況,統籌現場施工進度、品質、安全、人員及材料設備安排,並協助工程案件順利推進至測試、驗收及交付階段。 工作內容 1. 負責空調、水電、機電工程現場施工管理,掌握工地進度、施工品質、安全狀況及各工種施工界面。 2. 依工程圖說、施工規範及現場條件,協調施工順序、施工方法、人員安排及材料設備進場時程。 3. 協助審閱施工圖、套圖、竣工圖及相關技術資料,確認施工內容與現場狀況是否一致,並回報需調整或協調事項。 4. 管理現場施工人員、協力廠商及分包商,追蹤每日施工進度、施工數量、缺失改善及待辦事項。 5. 配合業主、監造、設計單位、總包及其他工種進行工地協調,協助解決施工界面、圖說疑義及現場問題。 6. 協助控管材料設備進場、數量確認、施工使用狀況及現場堆置管理,避免影響施工進度與品質。 7. 執行現場品質管理,協助辦理自主檢查、材料查驗、施工查驗、缺失改善及相關紀錄整理。 8. 落實工地安全衛生管理,督導現場人員遵守工地安全規定,配合安全檢查、教育宣導及缺失改善。 9. 協助工程進度排程、現場施工日報、會議紀錄、施工照片及工程相關文件資料回報。 10. 配合空調、水電、機電設備安裝後之測試、調整、試運轉、查驗及驗收作業。 11. 協助工程估驗計價、追加減帳、材料數量確認及現場施作數量回報。 12. 依公司及專案需求,完成主管交辦之工程管理、現場協調及文件回報事項。 我們期待的人 1. 具空調、水電、機電工程現場管理經驗,能獨立掌握施工進度、品質及現場協調事項。 2. 熟悉工程圖說判讀、施工流程、材料設備及現場施工界面管理。 3. 具備與業主、監造、廠商、工班及內部團隊溝通協調的能力。 4. 做事負責、重視安全與品質,能即時回報現場問題並協助提出處理方式。 5. 具備基本文書能力,能使用 Microsoft Office 協助整理施工紀錄、進度資料及工程文件。 6. 具相關證照、公共工程經驗、機電工程管理經驗或大型工地配合經驗者尤佳。
高年級課輔/安親老師工作內容 1.指導學生作業,協助輔導加強課業 2.講解數學、批改評量 3.熟悉學員學習狀況 4.掌握教室秩序 5.打掃環境、整潔維護 6. 偶有加班:考前加強半天或整天 一個年級一個班 上班時間:11:30-19:30 人數津貼/招生獎金
不限科系熱心服務者皆可 1.向顧客說明貨品的性質、特徵、品質與價格 2.在成交後,包裝商品、收取款項、交付商品、開發票或收據,完成交易手續 3.在當天結束營業前,統計銷售情形、盤點貨品存量及撰寫當日業務報表
1.門市商品進貨理貨 2.門市商品補貨上架 3.門市商品及環境清潔 4.倉庫商品整理 5.店主管交辦事項
1.接送復康巴士預約之乘客。 2.車輛內部清潔維護。 3.主管臨時交辦事項。 4.具職業大客車或大貨車經驗者佳。
1.發泡材料加工測試。 2.機台維運作業 3.研究計畫協助撰寫。 4.研究計畫資料處理、執行。 5.協助廠商上機測試及技術服務。 6.其他相關業務交辦事項。
1.高分子材料物性分析 2.政府委辦計畫執行 3.配合單位及主管交辦事項
工作內容: 1、門市商品介紹、銷售、客服 2、POS系統收銀機操作、結帳 3、維持門市整潔環境 4、商品陳列、補貨、盤點 薪酬制度: 1、每月達成獎金、每季獎金(不用擔心~每個月薪資+獎金平均超過50000!!!) 上班時間: 1、10:30~22:30(中間各有兩次休息時間~) 2、依照當月紅字進行排休 個性活潑開朗、笑容親和力十足 願意虛心學習及細心負責的工作態度 能獨立思考、處事圓融、具有良好的溝通能力 主動積極、企圖心強、歡迎挑戰高薪
1. 機台操作及維護 2. 加工工件巡檢 3. 工件清潔整理 4. MasterCam軟體應用
1. 接待顧客並提供專業且熱忱的服務,包含解答相關諮詢及處理退換貨事宜 2. 熟練使用收銀機及POS系統,負責銷售結算及開立發票等收銀作業 3. 確保商品陳列整齊並具有吸引力,維持店面環境的清潔與整潔 4. 負責進出貨管理、商品進銷存的更新與庫存盤點紀錄 5. 熟悉食品安全及衛生相關作業標準,維護商品品質與安全 6. 協助執行促銷活動,主動介紹並推銷商品以達成銷售目標 7. 定期製作銷售報表與資料統計,提供管理層相關參考 歡迎加入我們的團隊!期待您的優秀服務精神與專業技能,與我們一起打造卓越的購物體驗,立即投遞履歷吧!
負責收款、發票開立、銀行往來業務、各項費用支付、勞健保業務、一般行政文書作業(Word、Excel)完成主管其他交辦事項。 。
須具備設計相關知識、廣告設計、Illustrator、PhotoShop繪圖工具及軟體操作負責網站內容維護等、完成主管其他交辦事項。