面試經驗談專區

Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site

1. Develop Lam’s spare parts business strategy in collaboration with Business Development Managers, the tool sales team, and Product Groups. 2. Execute Lam’s business strategy and project plans to secure and grow spare parts market share across all Lam platforms. 3. Streamline spare part–related processes and ownership, including loaners, New Part Applications (NPA), Part Change Notifications (PCN), Product Lifecycle Management (PLC), part attribute definition, and part pricing parity. 4. Lead spare part cost reduction projects, including localization initiatives and alternative solution development in collaboration with Product Management and the Business Groups.

1. High travel rate: 70~75％ of the time, including international travels. 2. Comply with all safety procedures and demonstrate safety consistently as a value. 3. Complete the installation by consistent result with specified cycle times. Control the spending within budget. Train the local engineer to have same knowledge and skills. 4. Perform all standard installation activities from system move-in (Tier0), hardware setup (Tier1), process tuning (Tier2) independently. 5. Be able to run upon shift model as needed and perform routine preventative maintenance within established timeframes. Complete quality repairs. 6. Plan assimilation & Training: Train ramping operations (SOP, EHS), product knowledge assimilation, and conduct cross-product training during off-ramping. 7. Organize startup lesson learn with overall account team. 8. Work with site management to drive the MFG (manufacturing) quality improvement plan. 9. Diagnose and resolve technical problems. Use training and experience to identify process and software or hardware related system problems. 10. Assume responsibility to follow customer ground rules, regulations, and for complete customer satisfaction within work area. Assist in planning, communicating, and coordinating the installation plans with customer. 11. Respond to fab issues by communicating with other engineers and participating in escalation conference calls. Apply diagnostic techniques, using of documentation, and test equipment with assistance from senior engineer. May participate in projects to reduce costs and increase uptime.

We are looking for a talented Senior Engineer ( with EOS, DV, DVP or Sabre3D experience will be great) to become a part of our Global Flexible Workforce Team. 1. High travel rate: 75％ of the time, including international travel (could over 50％). 2. Comply with all safety procedures and demonstrate safety consistently as a value. 3. Complete the installation by consistent result with specified cycle times. Control the spending within budget. Train the local engineer to have same knowledge and skills. 4. Perform all standard installation activities from system move-in (Tier0), hardware setup (Tier1), process tuning (Tier2) independently. 5. Be able to run upon shift model as needed and perform routine preventative maintenance within established timeframes. Complete quality repairs. 6. Plan assimilation & Training: Train ramping operations (SOP, EHS), product knowledge assimilation, and conduct cross-product training during off-ramping. 7. Organize startup lesson learn with overall account team. 8. Work with site management to drive the MFG (manufacturing) quality improvement plan. 9. Diagnose and resolve technical problems. Use training and experience to identify process and software or hardware related system problems. 10. Assume responsibility to follow customer ground rules, regulations, and for complete customer satisfaction within work area. Assist in planning, communicating, and coordinating the installation plans with customer. 11. Respond to fab issues by communicating with other engineers and participating in escalation conference calls. Apply diagnostic techniques, using of documentation, and test equipment with assistance from senior engineer. May participate in projects to reduce costs and increase uptime.

1.顧客連絡資料整理 2.負責部門相關文件之整理，建檔以及追蹤，於有效時間內回覆顧客信件 3.定期提供業務銷售狀況報表，供業務人員或部門主管參考 4.處理業務回傳訂房、訂餐需求 5.完成業務主管其他交辦事項 6.接受訂位或者是訂房並記錄

1.飯店客房清潔及保養作業。 2.公共區域日常清潔保養作業。 3.大廳、營業場所、電梯、客廁等清潔作業。 4.備品補充、客房設備維護及保養。 5.無相關工作經驗可，具備飯店房務員/公清經驗者尤佳。

1.餐飲服務(跑單、擺盤、送餐)、領檯帶位、吧台飲料調製作業。 2.開廳前準備及關廳後清潔作業執行。 3.配合執行定期餐飲器具設備盤點作業。 4.無經驗可，具飯店餐飲相關工作經驗者佳。

1.飯店設備保養及維修 2.協助支援各部門內修繕工程處理進度。 3.飯店空調、消防、給排水、電力弱電等系統平常性維護保養及巡視。 4.馬達簡易修繕。 5.其他主管交辦事項。

1.餐飲服務(跑單、擺盤、送餐)、領檯帶位、吧台飲料調製作業。 2.開廳前準備及關廳後清潔作業執行。 3.配合執行定期餐飲器具設備盤點作業。 4.無經驗可，具飯店餐飲相關工作經驗者佳。

1. 休閒櫃檯及兒童遊戲室接待與服務。 2. 館內休閒設施顧客接待服務、清潔及維護。 3. 現場活動帶領、炒熱氣氛、個性活潑(佳)。 4. 需不怕高，飯店有自由落體、高空攀岩、彩虹滑梯、中吊橋等高空設施 5. 熟DIY製作教學(佳)。 6. 無經驗可，肯學習。 7. 皆有供餐、外地也有提供宿舍申請。

1. 休閒櫃檯及兒童遊戲室接待與服務。 2. 館內休閒設施顧客接待服務、清潔及維護。 3. 現場活動帶領、炒熱氣氛、個性活潑(佳)。 4. 需不怕高，飯店有自由落體、高空攀岩、彩虹滑梯、中吊橋等高空設施 5. DIY製作教學(佳)。 6. 無經驗可，肯學習。 7. 皆有供餐、外地也有提供宿舍申請。

1. 協助主廚研發新品 2. 負責食物製作、擺盤 3. 備餐、烹調出餐、收料，且會爐台工作 4. 廚房食品安全衛生管理、清潔、維護、整理 5. 各項廚房設備清潔保養 6. 協助執行各項行政作業（盤點、下單、排班） 7. 協助分級管理、培訓員工。 8. 具西餐、自助餐規畫經驗尤佳 9. 維持整體廚房的衛生及清潔標準 10. 協助管理廚房廚務相關事宜 11. 協助出餐品質標準管制 12. 餐點食材進貨及備料管理 13. 協助廚房行政工作及菜色品質控管 14. 負責任、勇於接受批評進而改進、 15. 樂於料理的創作可將自己擅長的廚藝加以運用

1.清洗食材、備料 2.將食材依照廚師要求進行切片、切塊或切末等備料的工作 3.組合沙拉或冷盤 4.進行擺盤的動作 5.工作區域和設備的清潔以及保養 6.自助餐及宴席菜色料理協助 7.自助餐檯小點心製作 8.協助主管進行盤點及庫存管理

1.夜間帳務稽核、入住資料檢查。 2.負責旅客住宿前之準備、入住之安排、接待及結帳之相關工作。 3.房客住房登記辦理、結帳與問題詢問等相關事宜。 4.夜間客房需求執行及遞送。 5.其他主管交辦事項。 6.無經驗可，具飯店相關工作經驗者佳。

1.生產設備維修與定期保養，以確保生產之正常運作。 2.現場、機房設備異常檢查與維修。 3.鍋爐操作及保養。 4.須配合現場輪班。 5.其他主管交辦事項。

1.負責生產線機器、設備之操作及調整，維持機台正常運作。 2.與其他生產人員進行協調，以符合生產及程序標準。 3.物料線上檢驗。 4.物料回收作業。 5.其他主管交辦事項。 6.具有機械操作經驗者佳。

1.負責飼料生產線之操作(有經驗者佳) 2.完成主管交辦有關生產產品、程序事宜 3.設備簡易維護與環境清潔 4.需配合加班及工作崗位輪調 5.其他主管交辦事項。

1.飼料成品出貨(含散裝及包裝品) 2.飼料成品貨品整理 3.廠區巡檢及工作環境清潔 4.配合工作輪替 5.其他主管交辦事項 6.具堆高機證照佳

1.污水處理廠實驗室化驗廢(污)水水質檢測、儀器校正 2.廢水廠廢水設備操作及維護 3.例行性報表填寫 4.環保例行性文件申報 5.其他主管交辦事項

1.飼料相關產品包裝作業 2.飼料相關產品堆包 3.飼料包裝設備基礎保養及點檢 4.主管交辦事宜 5.需配合加班