交大專區

Major responsibility is Micron Taiwan new tech node high peak ramping task include daily service operation, installed base performance improvement, maintain customer satisfaction, as key sponsor to lead local team and co-work with PG/CSBG/Sales to make customer and company‘s goal completed Job Duties and Responsibilities (Technical / Operational responsibilities / Performance objectives of this position) 60％ of time • Represent field service head to customer, develop and maintain good customer relationship. Be accountable for service operation to achieve company goals. • Manage installed base performance of assigned functions to ensure achievement of system performance to product specifications. • Manage and direct the activities of field service and technical support required for installation, servicing and modification of company products • Co-work with sales, service team, process engineering and product group closely to support customer technical and production requirements, evaluate product performance and best solution delivery • Forecast and control I&W within ISR plan and manage the utilization of engineers for a balanced absorption result. • As bridge of customer and product group to deliver clear issue statement and support need to keep improving and demonstrating system performance, available and reliability. • Coordinate hot escalation with local and support team, manage and arrange resources to estimate down case and interruption of production • Secure zero safety EHS event with non-hazards environment and provide sufficient training and guide service team continuously. People Management (Responsibility for leading, motivating and developing staff) 40 ％ of time • Be responsible for training, motivation, employee development and discipline of assigned employees.

Technical 1. Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam‘s complex electro-mechanical and electronic systems at customer sites. 2. Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions. 3. Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification. 4. Maintain records and reports to coordinate activities between Lam and the customer. 5. Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction. 6. Transparently discuss opportunities and challenges with customer to increase trust. 7. Update customer on status of Lam tools as needed. Leadership 1. May Provide on-site instruction to sub-contractors and customers. Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2. Shadow more experienced engineer at customer site

Technical 1. Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam‘s complex electro-mechanical and electronic systems at customer sites. 2. Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions. 3. Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification. 4. Maintain records and reports to coordinate activities between Lam and the customer. 5. Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction. 6. Transparently discuss opportunities and challenges with customer to increase trust. 7. Update customer on status of Lam tools as needed. Leadership 1. May Provide on-site instruction to sub-contractors and customers. Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2. Shadow more experienced engineer at customer site

Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision 8. Perform other related duties as assigned by senior FSE / supervisor Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site

【本職缺接受科林研發官方網站投遞】 請至科林研發官方網站投遞個人履歷表，此職缺履歷登錄網址: https://careers.lamresearch.com//job-invite/184029/ Technical 1 Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites. 2 Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions. 3 Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification. 4 Maintain records and reports to coordinate activities between Lam and the customer. 5 Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction. 6 Transparently discuss opportunities and challenges with customer to increase trust. 7 Update customer on status of Lam tools as needed. Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2. Shadow more experienced engineer at customer site

【本職缺接受科林研發官方網站投遞】 請至科林研發官方網站投遞個人履歷表，此職缺履歷登錄網址: https://careers.lamresearch.com//job-invite/183934/ Technical 1 Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites. 2 Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions. 3 Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification. 4 Maintain records and reports to coordinate activities between Lam and the customer. 5 Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction. 6 Transparently discuss opportunities and challenges with customer to increase trust. 7 Update customer on status of Lam tools as needed. Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2. Shadow more experienced engineer at customer site

Looking to hire an experienced hardware engineer who is familiar with the semiconductor equipment manufacturing industry and doesn‘t shy away from the challenges that come with it, along with supporting Lam‘ s top tier customers. In addition to being Safety First oriented, the prospective candidate should possess strong organizational skills, be a critical thinker, and able to comprehend electrical schematics and equipment drawings. They also need to be able to effectively communicate in English. Being knowledgeable and having previous experience supporting Lam‘s SIG (Prevos, Selis, Argos) and Bevel (Coronus) products is preferable. This person will need to manage their time, work collaboratively within cross-functional teams and multi-task, to resolve our internal and external customer issues as quickly as possible. This position is based in Hsinchu. Must be willing to relocate if they‘re not already in Hsinchu. Job Responsibilities • As a Regional Product Support Engineer at Lam, you‘re the backbone of technical support for field engineers, technicians, and product support personnel in the region. • Your expertise is crucial in diagnosing, troubleshooting, repairing, and debugging complex electro-mechanical equipment, computer systems, software, or networked and wireless systems. • Your swift action in responding to situations is critical in resolving issues and ensuring satisfaction of Lam‘s valued customers. Other information: • Residence Location – Flexible • Work location – Hsinchu • Travel – PS team is centralized organization, so PS engineer isn‘t dedicated to a specific work location. (1) Need to take not only domestic but also international travel if needed (2) The frequency of travel depends on the demand from customers including Act team (3)＞30％ travel commitment

Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership 1. May Provide on-site instruction to sub-contractors and customers. Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site.

Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site

1. High travel rate: 70~75％ of the time, including international travels. 2. Comply with all safety procedures and demonstrate safety consistently as a value. 3. Complete the installation by consistent result with specified cycle times. Control the spending within budget. Train the local engineer to have same knowledge and skills. 4. Perform all standard installation activities from system move-in (Tier0), hardware setup (Tier1), process tuning (Tier2) independently. 5. Be able to run upon shift model as needed and perform routine preventative maintenance within established timeframes. Complete quality repairs. 6. Plan assimilation & Training: Train ramping operations (SOP, EHS), product knowledge assimilation, and conduct cross-product training during off-ramping. 7. Organize startup lesson learn with overall account team. 8. Work with site management to drive the MFG (manufacturing) quality improvement plan. 9. Diagnose and resolve technical problems. Use training and experience to identify process and software or hardware related system problems. 10. Assume responsibility to follow customer ground rules, regulations, and for complete customer satisfaction within work area. Assist in planning, communicating, and coordinating the installation plans with customer. 11. Respond to fab issues by communicating with other engineers and participating in escalation conference calls. Apply diagnostic techniques, using of documentation, and test equipment with assistance from senior engineer. May participate in projects to reduce costs and increase uptime.

We are looking for a talented Senior Engineer ( with EOS, DV, DVP or Sabre3D experience will be great) to become a part of our Global Flexible Workforce Team. 1. High travel rate: 75％ of the time, including international travel (could over 50％). 2. Comply with all safety procedures and demonstrate safety consistently as a value. 3. Complete the installation by consistent result with specified cycle times. Control the spending within budget. Train the local engineer to have same knowledge and skills. 4. Perform all standard installation activities from system move-in (Tier0), hardware setup (Tier1), process tuning (Tier2) independently. 5. Be able to run upon shift model as needed and perform routine preventative maintenance within established timeframes. Complete quality repairs. 6. Plan assimilation & Training: Train ramping operations (SOP, EHS), product knowledge assimilation, and conduct cross-product training during off-ramping. 7. Organize startup lesson learn with overall account team. 8. Work with site management to drive the MFG (manufacturing) quality improvement plan. 9. Diagnose and resolve technical problems. Use training and experience to identify process and software or hardware related system problems. 10. Assume responsibility to follow customer ground rules, regulations, and for complete customer satisfaction within work area. Assist in planning, communicating, and coordinating the installation plans with customer. 11. Respond to fab issues by communicating with other engineers and participating in escalation conference calls. Apply diagnostic techniques, using of documentation, and test equipment with assistance from senior engineer. May participate in projects to reduce costs and increase uptime.

【招募職缺】 設備工程師｜Field Service Engineer • 電機／機械／航太 / 自動控制 等相關理工科系學士或碩士畢業 • 對半導體產業及設備工程職務具高度興趣 • 需有機械相關的基礎知識 有半導體製程知識者尤佳 • 需有問題解決、溝通表達、團隊精神、主動學習等能力 • 需能配合大多數工作時間內，穿著無塵衣且將在無塵室環境中工作 ______________________ 【面試資訊】 • 活動日期：3/28（六） • 活動時間：上午場 09:00–12:00｜下午場 13:00–16:00 • 活動地點：台南 • 工作地點：台南／高雄 ※ 3/28場次優先招募台南/高雄職缺。錄取後需配合公司安排在這兩個地區工作，若對於這兩個地區有意願再請投遞履歷。 ______________________ 【活動亮點】 • 與部門主管及 HR 現場面對面交流 • 深入了解美商半導體設備商的實際工作內容、值班模式與員工福利 ______________________ 【招募流程】 • 第一階段｜履歷投遞與英文能力評估，若無英文成績單需參加線上英文測驗 • 第二階段｜由用人主管進行履歷審核，若審核通過者將於 2 週內安排電話面談 • 第三階段｜通過審核後，提交制式工作申請表，將發送活動邀請 • 招募面談｜3/28（六） 參與F2F招募活動，現場與主管進行面試

機械設計╱繪圖人員 1.製作機械的裝置、工具及控制器之詳細設計圖及說明。 2.檢閱及分析規格、草圖、藍圖、想法和相關數據，以評估組件設計的影響因素及所須遵照的程序和指示。 3.提供零件或機器設計所需的數學運算程式。 4.修改設計以改良操作缺點或生產問題。 5.設計按比例縮小或實物大小的物件藍圖。 6.熟soildworks

1.對於機械電路配線及規劃有基本的知識，有實際配線經驗者佳。 2.熟三菱 或 OMRON PLC、Proface人機程控，負責軟體的分析、設計、程式撰寫與維護。 3.進行軟體的測試與修改以及控管軟體設計進度。 4.試車。維修等工作。 其它說明：需出差(國內當天來回)

- 執行SEO及推廣相關的活動。 - 負責網站推廣，外鏈建設工作，能夠快速為網站獲取高權重鏈接；提高網站整體流量。 - 熟悉GA、GSC、Ahrefs、MOZ以及相關工具使用。 - 監測分析公司與客戶網站流量，排名收錄等數據，並優化網站整體排名。 - 提高網站在搜索引擎內的排名。

- 負責網站推廣，外鏈建設工作，能夠快速為網站獲取高權重鏈接;提高網站整體流量 。 - 監測分析公司網站流量，排名收錄等數據，提升網站整體排名和流量，提出優化建議 。 - 網站建置切版、程式編寫、產品上架。 - 與設計組討論網站建置事宜。 - 精通SEO原理，如關鍵字優化、標籤優化、標題優化、關鍵字排名優化等。

1.綜理本中心各式資訊管理系統及網頁之規劃、整合及開發等事項。 2.辦理本中心資訊相關硬體設備及網路通訊之規劃、管理維護及資訊安全事項。 3.其他主管交辦事項。

1.具水電相關證照或飯店工務經驗者佳。

1.負責BMS軟體韌體之分析、設計以及程式撰寫。 2.規劃執行軟體架構及模組之設計，並控管軟體設計進度。 3.進行軟體之測試與修改。 4.規劃、執行與維護量產的產品。 5.協助研發軟體新技術與新工具。 1. Responsible for the analysis, design and programming of BMS software firmware. 2. Plan and execute the design of software architecture and modules, and control the progress of software design. 3. Perform software testing and modification. 4. Planning, implementation and maintenance of mass-produced products. 5. Assist in the development of new software technologies and new tools.

1. 儲能系統設計(應用於電池模組/電池機櫃)。 2. 負責機構產品板金設計/塑膠件設計/配線設計/機電元件整合。 3. 負責機構材料選用與驗證。 4. 電池包機構設計。 5. 組裝與維修。 1. Energy storage system design (applied to battery modules/battery cabinets). 2. Responsible for mechanical design with sheet metal design/plastic parts design/wiring design/mechanical component integration. 3. Responsible for the selection and verification of mechanical materials. 4. Battery pack mechanical design. 5. Assemble and repair.