交大專區

1.監督水電工程現場施工 2.按照藍圖進行高低壓配電線路施工、電路維修及電器設備安裝 3.簡單基本設計、施工與維護

1、協助現場工作協調及人力、機具、物料之調度。 2、協助工安人員執行現場業務。 3、工務相關作業記錄報表及工程文書資料整理/建檔。 4、其他主管交辦事項。 ➤有營造工程之相關背景者尤佳 ➤歡迎肯學習、認真負責的您加入~

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes. • Responsible for performing professional process engineering research, design, development, modification, and evaluation. • Support the company‘s complex semiconductor capital equipment and systems, including cutting edge plasma dielectric conductor etcher, advance electrodes for plasma density control, and multi-layer power delivery system. • Determine process approaches and parameters. Review and evaluate processes. Generate or direct process activities and verify accuracy of final documentation. • Analyze and select components and equipment, as well as evaluate supplier capabilities. Design and conduct independent experiments or tests. • Define problems and objectives, develop approach, analyze results and provide recommendations. • Direct the implementation of required changes or modifications. Plan, conduct, and technically direct moderately complex projects. • Write and analyze Action Requests/Equipment Changes Notices.

1.執行各種設備( 電子、電機、機械 )功能測試，以確保機台功能測試結果符合LAM設備規格 2.針對設備測試問題，執行故障排除，並與相關部門合作，協助解決設備異常 3.測試完成後機台復歸及進行機台移交成品檢驗前，內部外觀檢驗作業，確保品質 4.依主管指示，及時完成交辦事項，支援生產需求 5.需配合公司輪班制度，維持產線運作

1.執行多種產品（電子、電機、機械、測量產品）之成品及模組組裝作業 2.組裝過程中，確實遵照組裝規範及操作 SOP，確保品質與安全 3.組裝時如發現異常，能即時與工程師溝通協調，確保問題迅速解決 4.依主管指示，及時完成交辦事項，支援生產需求 5.需配合公司輪班制度，維持產線運作

【請同時至科林研發官方網站投遞履歷】 此職缺履歷登錄網址: https://reurl.cc/vadDRy Technical 1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7.Execute project action items under direct supervision 8. Perform other related duties as assigned by senior FSE / supervisor Leadership 1. May Provide on-site instruction to sub-contractors and customers Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2.Shadow more experienced engineer at customer site

1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision. 2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate. 3. Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. 4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site. 6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials. 7. Execute project action items under direct supervision. 8. Perform other related duties as assigned by senior FSE / supervisor. Leadership May Provide on-site instruction to sub-contractors and customers. Customer Relation 1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 2. Shadow more experienced engineer at customer site.

1.參與每日施工工具箱會議 2.現場監工 3.工程後請購、發包作業 4.專案相關報表製作

1.參與每日施工工具箱會議召開 2.現場施工監工 3.工程發包、請購 4.配合夜間、假日施工 5.其他工程師相關工作事項 6.其他交辦事務等

1.研究、設計、評估、安裝、操作及維護機械產品、設備系統與程序，以符合要求。 2.執行機械相 關研發工作。 3.使用電腦輔助設計(CAD)或草擬設備和軟體，能獨立設計新研發產品的架構。 4.測試、檢測與分析設備、組件和系統之可行性。 5.研究和分析客戶設計規劃、產品規格、說明書等資料。

我們是專注於供酸／充填／清洗設備製造與配管工程的專業團隊，服務半導體與電子產業。現誠徵具備基本機械繪圖背景、對設備設計有熱情的您加入我們，一起從設計到製造現場實作，全程參與完整開發流程！ 🔧 參與完整機械設備設計流程 負責 2D／3D 機械設計圖繪製 製作機器圖面、外購件清單與操作手冊等技術文件 🤝 跨部門合作，支援實際製造安裝 與製造、安裝部門密切配合 支援現場安裝與測試，讓設計能真正落地應用 💡 參與設計討論，累積實戰經驗 和工程師共同討論結構、流程、選材等細節 快速累積從設計到製造的實務能力 📐 製作完整工程圖與資料 提供準確結構、尺寸、材料與製程資訊 為團隊提供清楚的視覺與技術依據 🎁【我們提供的條件】： 💰 薪資：月薪 NT$40,000 起（依能力調整） 🕒 工作時間：日班／週休二日 📍 工作地點：桃園市八德區（交通便利） 🌱 學習完整設備設計與製造經驗，技術養成快 👀【適合這樣的你】： 對機械設計、設備繪圖有熱忱 喜歡參與實作、現場解決問題 熟悉 AutoCAD／SolidWorks（或其他3D軟體） 理工／機械相關科系佳（或具實務經驗）

我們是專業從事供酸／充填／清洗設備製造與配管工程的廠商，服務半導體與電子產業客戶。現誠徵【繪圖助理】，不只是單純繪圖，而是能實際參與到設計、製造與組裝流程，適合想學習、願意成長的你！ 📐 協助主管進行機械繪圖與設計資料製作 輔助完成機械結構圖、組裝圖、零件清單 製作外購件明細、操作手冊、說明書等設計文件 🔧 支援現場製造與安裝流程 協助組裝、配合現場工程進度 與生產、工程、採購部門保持良好溝通 🧠 參與設計會議，學習技術討論與製程判斷 了解設備設計考量，學習結構選型與工法安排 快速累積產業知識與實務經驗 🎨 繪製工程圖，提供準確技術資訊 顯示結構、尺寸、公差、材料等完整資訊 提供製造與安裝人員正確的參考依據 💰【薪資福利】 月薪 NT$35,000 起（依經驗與能力調整） 週休二日（固定休假，工作穩定） 提供完整在職學習機會，協助技能提升 🔍【我們正在找這樣的你】： 熟悉 AutoCAD 或 SolidWorks 操作（或其他繪圖軟體） 理工／機械相關科系畢業佳，無經驗可 樂於學習、細心負責，願意與團隊合作

1. 協助進料、預製、整備與安全維護 2. 主機安裝、線路配置的施工 3. 儀載設備之調校、測試、改造 4. 常設性安全檢測、保養維護

設備安裝工程人員 機台 設備 測試 維護 上班時間07:00~16:30 中間休息1~1.5小時 薪資 38000~45000 午餐與加班津貼另計 年中固定一次績效獎金

1.產品繪圖 2.交辦事項 3.熟solidworks 3D製圖

1.產品機構設計與繪製 2.相關文件作成與整理 3.主管交辦事項 4.有相關經驗尤佳

1.全方位足研管理師。 2.品牌旗艦店/足研科技中心/科技足測。 3.鞋類開發整合管理。 全方位3D動態科技量腳-全台首創3D動態量測足部實驗室 https://www.lanew.com.tw/v2/activity/15224

1.監督水電工程現場施工 2.配合設計師裝修案場配迴路線與基本廁所給水排水修改,消防灑水頭修改 3.弱電網路部分配線 4. 照明燈具、開關插座安裝、 @ 專做室內裝修案 不須日曬風吹雨淋@

1.需熟AutoCad 軟體操作能力 2.太陽能面板支架結構繪圖設計 3.案場現勘與丈量 4.其他主管交辦事項

1.雷射機台的操作 日班制-早8-16和8-17時，有時須配合加班2~3小時 2.依照圖面做切割工作 3.維修及保養雷射機台 4.其他主管交辦事項