研發替代役專區

應徵資格 Requirements 1. 具國內外博士學位或助理教授以上資格。 2. 專長領域：AI應用、程式設計及環境/回收工程相關領域。 3. 有熱誠從事教學、學生輔導與研究，能配合推動學程未來發展者。 工作內容 Work Content 1.支援學程課程授課(AI應用、程式設計及循環經濟相關) 2.學生學習輔導與研究 3.能協助學院/學程推動招生事務及國際化推廣。 檢附證件 Required Materials 1.履歷（含自傳、聯絡地址、電話、學經歷等） 2.學位證書影本 3.教師證書影本（初次任教者免） 4.經歷證明文件影本 5.博士論文摘要 6.推薦信1～2封 7.代表著作 ★ 國外學歷證書及成績單，需先經駐外單位驗證 ★ –––––––––––––––––––––––––––––––––––––––––––––––––––– (1)採隨到隨審，聘滿即停止徵件，應徵人數過多，得擇優通知面試。(資料均不退還) (2)掛號郵寄至：433303臺中市沙鹿區臺灣大道7段200號[靜宜大學永續智慧學程] （請於信封註明「應徵教師文件」） 每月薪資 Monthly Salary 84,870元起 聯絡訊息 Contact Information 楊晶詒 ( 04-26328001轉分機:15002 / 電子信箱: jyyang3@pu.edu.tw )

#Job Summary -Development of automotive mmWAVE Radar or Ultrasonic sensor circuit design, layout, testing, and troubleshooting -Electronic circuit design, layout review, EMC (Electromagnetic Compatibility) testing, and troubleshooting -Prototyping production and introduction to mass production -Product performance verification and regulatory certification -Willingness to travel internationally at least twice per year to the United States, Europe (Germany, Italy, etc.), or other countries where major automakers are headquartered. #General Job Requirements: -Promotion of new products within the group (proposal, demo) -Maintenance of existing products and customer relationships -Tasks assigned by the supervisor -Provide technical support to responsible clients #(Tier 1) Professional Job Requirements: -Take responsibility to the assigned development project -Collection and organization of data related to global regulations, automaker standards, and corporate guidelines -Prepare documents following development standards such as ISO 26262, ISO 21434, ASPICE, etc. -Development of new technologies and creation of related technical documents -Verification of developed technologies through theory, simulation platforms, or real vehicle testing -Support for DV (Design Validation) or PV (Product Validation) experiments -Patent proposals -Collection and organization of industry information #Annual evaluation (tied to annual KPIs) -Understanding of regulations and automaker standards -Improvement of professional technical knowledge -Understanding of the group’s products #Design and development -Collaborating with engineering teams, including antenna engineers, to optimize circuit design, product assembly, heat dissipation, and electromagnetic effects. -Simulation analysis and problem-solving for electronic hardware designs -Verification testing and measurement reports for electronic hardware designs -Solving SI(signal Integrity) and PI(Power integrity) issues and ensuring compliance with customer‘s EMC (Electromagnetic Compatibility) standards. -Designing and producing testing equipment for testing, validation and production. -Searching and validating new electronic materials -Supporting quality issues analysis and design improvement #Failure or Quality analysis Development Phase: -Troubleshooting system failures -Identify and resolve system issues Production Phase: -Collecting and addressing customer complaints -Providing post-production support to customers #Document production -Writing technical specification documents for electronic hardware products -Preparing and updating Bill of Materials (BOM) documentation and managing inventory through the company‘s management system -Preparation of development documents, including production-ready diagrams and related materials -Compliance with system standards (e.g. ISO26262) #Prototyping -DUT preparation for demo/testing #Technical support -Remote/ On site support for end customer or 3rd parties involved in the project. -Remote/ On site supports internal TTE group for training or technology transfer. #Expertise -Circuit design, Layout, SI/PI, EMC #Technical Skills -OrCAD/Pads/Altium Designer…

#Job Summary: -Development of automotive Camera circuit design, layout, testing, and troubleshooting -Electronic circuit design, layout review, EMC (Electromagnetic Compatibility) testing, and troubleshooting -Prototyping production and introduction to mass production -Product performance verification and regulatory certification -Willingness to travel internationally at least twice per year to the United States, Europe (Germany, Italy, etc.), or other countries where major automakers are headquartered. #General Job Requirements: -Promotion of new products within the group (proposal, demo) -Maintenance of existing products and customer relationships -Tasks assigned by the supervisor -Provide technical support to responsible clients #(Tier 1) Professional Job Requirements: -Take responsibility to the assigned development project -Collection and organization of data related to global regulations, automaker standards, and corporate guidelines -Prepare documents following development standards such as ISO 26262, ISO 21434, ASPICE, etc. -Development of new technologies and creation of related technical documents -Verification of developed technologies through theory, simulation platforms, or real vehicle testing -Support for DV (Design Validation) or PV (Product Validation) experiments -Patent proposals -Collection and organization of industry information #Annual evaluation (tied to annual KPIs) -Understanding of regulations and automaker standards -Improvement of professional technical knowledge Understanding of the group’s products #Design and development -Collaborating with engineering teams, including antenna engineers, to optimize circuit design, product assembly, heat dissipation, and electromagnetic effects. -Simulation analysis and problem-solving for electronic hardware designs -Verification testing and measurement reports for electronic hardware designs -Solving SI(signal Integrity) and PI(Power integrity) issues and ensuring compliance with customer‘s EMC (Electromagnetic Compatibility) standards. -Designing and producing testing equipment for testing, validation and production. -Searching and validating new electronic materials -Supporting quality issues analysis and design improvement #Failure or Quality analysis: Development Phase: -Troubleshooting system failures -Identify and resolve system issues Production Phase: -Collecting and addressing customer complaints -Providing post-production support to customers #Document production: -Writing technical specification documents for electronic hardware products -Preparing and updating Bill of Materials (BOM) documentation and managing inventory through the company‘s management system -Preparation of development documents, including production-ready diagrams and related materials -Compliance with system standards (e.g. ISO26262) #Prototyping: -DUT preparation for demo/testing #Technical support: -Remote/ On site support for end customer or 3rd parties involved in the project. -Remote/ On site supports internal TTE group for training or technology transfer. #Expertise: -Circuit design, Layout, SI/PI, EMC -Optical lens and image sensor matching. #Technical Skills: -OrCAD/Pads/Altium Designer…

#Job Summary -Development of automotive electronics (Sensor or ECU) mechanical design. -The job responsibilities include selecting injection-molded plastic materials, reviewing outsourced mold quality, establishing environmental testing specifications, inspecting and accepting molds and finished products, and conducting preliminary process design (in collaboration with the production engineering team). -Prototyping production and introduction to mass production -Product performance verification and regulatory certification -Willingness to travel internationally at least twice per year to the United States, Europe (Germany, Italy, etc.), or other countries where major automakers are headquartered. #General duties General Job Requirements: -Promotion of new products within the group (proposal, demo) -Maintenance of existing products and customer relationships -Tasks assigned by the supervisor -Provide technical support to responsible clients #(Tier 1) Professional Job Requirements: -Take responsibility to the assigned development project -Collection and organization of data related to global regulations, automaker standards, and corporate guidelines -Prepare documents following development standards such as ISO 26262, ISO 21434, ASPICE, etc. -Development of new technologies and creation of related technical documents -Verification of developed technologies through theory, simulation platforms, or real vehicle testing -Support for DV (Design Validation) or PV (Product Validation) experiments -Patent proposals -Collection and organization of industry information Annual evaluation (tied to annual KPIs) -Understanding of regulations and automaker standards #Design and development -Collaborating with engineering teams, including antenna engineers, to optimize circuit design, product assembly, heat dissipation, and electromagnetic effects. -Simulation analysis and problem-solving for electronic hardware designs -Verification testing and measurement reports for electronic hardware designs -Designing and producing testing equipment for testing, validation and production. -Searching and validating new materials -Supporting quality issues analysis and design improvement #Failure or Quality analysis: Development Phase: -Troubleshooting system failures -Identify and resolve system issues Production Phase: -Collecting and addressing customer complaints -Providing post-production support to customers #Document production: -Writing technical specification documents for electronic hardware products -Preparing and updating Bill of Materials (BOM) documentation and managing inventory through the company‘s management system -Preparation of development documents, including production-ready diagrams and related materials -Compliance with system standards (e.g. ISO26262) #Prototyping: -DUT preparation for demo/testing #Technical support: -Remote/ On site support for end customer or 3rd parties involved in the project. -Remote/ On site supports internal TTE group for training or technology transfer. #Expertise: Experience in designing ultrasonic sensors, image sensors, or millimeter-wave radar sensors is required. #Technical Skills: -AutoCAD (must) -CATIA, Siemens NX (choose one) -SolidWorks (optional)

#Job summary • We are seeking a talented Camera Image Quality Engineer to join our Camera Systems team at TTE. We welcome candidates from entry-level, senior, and staff levels for this exciting opportunity. • As a key member of our team, you will be responsible for the entire camera lifecycle, encompassing sensor selection, lens development, camera module design, quality control monitoring, camera calibration, image quality assessment, and camera tuning. • Willingness to travel internationally at least twice per year to the United States, Europe (Germany, Italy, etc.), or other countries where major automakers are headquartered. • If you have a passion for camera technology and image quality, we want to hear from you! Our ideal candidate will have a strong foundation in camera systems engineering, with expertise in image processing, sensor technologies, and manufacturing quality assurance. #General Job Requirements: -Promotion of new products within the group (proposal, demo) -Maintenance of existing products and customer relationships -Tasks assigned by the supervisor -Provide technical support to responsible clients #(Tier 1) Professional Job Requirements: -Take responsibility to the assigned development project -Collection and organization of data related to global regulations, automaker standards, and corporate guidelines -Prepare documents following development standards such as ISO 26262, ISO 21434, ASPICE, etc. -Development of new technologies and creation of related technical documents -Verification of developed technologies through theory, simulation platforms, or real vehicle testing -Support for DV (Design Validation) or PV (Product Validation) experiments -Patent proposals -Collection and organization of industry information #Annual evaluation (tied to annual KPIs) -Understanding of regulations and automaker standards -Improvement of professional technical knowledge -Understanding of the group’s products #Design and development -Tuning parameters for 3A (AE/AF/AWB) and ISP (Image Signal Processor) -Improving the calibration process and methods -Enhancing pre-calibration software and hardware check procedures -Improving the efficiency of using adaptation tools -Camera module EEPROM configuration -Camera module testing, analysis & reporting -Introducing new camera modules to factory line -Setting up image quality test facility #Failure or Quality analysis Development Phase: -Troubleshooting system failures -Identify and resolve system issues Production Phase: -Collecting and addressing customer complaints -Providing post-production support to customers #Document production -Preparation of development documents, including production-ready diagrams and related materials -Compliance with system standards (e.g. ISO 26262) -Documentation on processes or development activities #Prototypin -DUT preparation for demo/testing #Technical support -Remote/ On site support for end customer or 3rd parties involved in the project. -Remote/ On site supports internal TTE group for training or technology transfer. #Expertise: -Must have knowledge of image-related topics, including image sensors, image quality, calibration, and camera modules. #Technical Skills: -Must have excellent English communication skills (required). Fluency in another second language is optional. -Ability to read and understand contact image sensor (CIS) specifications from leading manufacturers such as Sony, OV, ON-Semi. -Must be familiar with laboratory instruments and have excellent skills in image quality (IQ) testing. -Familiar with image quality analysis software (Imatest)

#Job summary: -As a key contributor, you will work on embedded software development using C/C++ in RTOS environments, supporting vehicle network protocols (CAN, CANFD, LIN, Ethernet) and AUTOSAR/QNX-based platforms. You will collaborate closely with cross-functional teams across hardware, mechanical, and system engineering to deliver production-ready software that meets automotive industry standards including ASPICE, ISO 26262, and ISO 21434. -Willingness to travel internationally at least twice per year to the United States, Europe (Germany, Italy, etc.), or other countries where major automakers are headquartered. -We are looking for an experienced Embedded Software Integrator to join our Automotive R&D team at TTE. This role is responsible for integrating and validating embedded software for automotive electronic control units (ECUs) and sensor systems. #General duties: -Promotion of new products within the group (proposal, demo) -Maintenance of existing products and customer relationships -Tasks assigned by the supervisor -Provide technical support to responsible clients #(Tier 1) Professional Job Requirements: -Take responsibility to the assigned development project -Collection and organization of data related to global regulations, automaker standards, and corporate guidelines -Prepare documents following development standards such as ISO 26262, ISO 21434, ASPICE, etc. -Development of new technologies and creation of related technical documents -Verification of developed technologies through theory, simulation platforms, or real vehicle testing -Support for DV (Design Validation) or PV (Product Validation) experiments -Patent proposals -Collection and organization of industry information #Failure or Quality analysis -Development Phase: Troubleshooting system failures Identify and resolve system issues -Production Phase: Collecting and addressing customer complaints Providing post-production support to customers #Document production -Preparation of development documents, including production-ready diagrams and related materials -Compliance with system standards (e.g. ASPICE, ISO26262, ISO21434) -Documentation on processes or development activities #Prototyping -Technical support #Technical support -Remote/ On site support for end customer or 3rd parties involved in the project. -Remote/ On site supports internal TTE group for training or technology transfer. [Technical Skills] -C/C++ programming language -Vehicle network (CAN, CANFD, LIN, ethernet) -RTOS -Embedded System Development -Familiar with AutoSAR/QNX development

1.具備工廠廠務及總務事務處理之相關經驗。 2.維護廠務系統及庶務性事務作業可正常運作。 3.統籌管理維護建築物公共安全、消防安檢、設備維護(水/電力/空調/消防/門禁/監視系統…等)、廠區環境清潔、水電維修、公務車輛管理、電信郵務、年節祭祀、園藝維護...等業務。 4.庶務性及雜項採購事務處理。 5.主管交辦事項。

# Manage customer complaints and ensure timely resolution. # Prepare and manage 8D reports and corrective actions. # Investigate and resolve quality issues. # Coordinate and support customer audits. # Drive continuous quality improvement initiatives. # Lead the resolution of major quality issues, customer complaints, and quality risk incidents related to Customer Service (CS), including root cause analysis, decision-making, corrective actions, and follow-up to ensure effective problem resolution. # Handle urgent quality incidents by providing timely recommendations and reporting to management, minimizing quality risks and operational impacts. # Coordinate cross-functional resources to drive quality improvement projects and resolve critical quality issues, ensuring projects are executed according to plan and achieve expected objectives. # Plan, chair, and participate in quality-related meetings, presenting quality performance, improvement results, and project progress to management and customers. # Manage customer complaints, investigate material quality issues, conduct quality system audits, and support customer audits as part of overall quality assurance activities. # Plan and implement continuous improvement initiatives to enhance product quality, manufacturing process capability, and customer satisfaction. # Must be willing to travel frequently overseas to support customer service requirements, including visits to automotive customers in Brazil, Germany, Italy, the United States, and other regions in Europe and North America. # Perform other quality management duties and assignments as delegated by supervisors.

1.館內DIY活動配合協助及銷售及餐飲工作執行 2.館內及館外環境清潔打掃 3.協助暑假期間相關活動與佈置 4.戶外水氣墊專屬工讀生及清潔打掃和指揮交通 5.完成主管交待工作與執行和配合

1. Microsoft Access 連結資料庫，依需求撰寫查詢指令及篩選條件，製成Excel或PowerPoint格式供其他單位後續使用。 2.使用Wscript撰寫程式，依需求自動化批次下載資料或產出報表。 3.利用Excel函數，依需求編製報表。 ※本職缺歡迎身障人士主動投遞履歷應徵

1.辦理保險相關作業(例如：勞保/健保/團保加退保、理賠作業、投保級距調整、新制退休金、補充保費等作業之執行) 及諮詢管理 2.招募作業執行(例如：招募管道/甄選工具之開發、人力銀行及派遣合約管理等) 3.新進人員任用審核作業 4.人力需求員額控管 5.職業災害統計申報作業管理 6.負責人資專案之執行(例如：招募、員工健康檢查及員工保險等專案規劃與推動) 7.其他主管交辦事項 ※本職缺歡迎身障人士主動投遞履歷應徵

研發土木工程相關自動繪圖系統

正規公司 ，公司擴大營業~ 正規專，長期兼職PO文，放無薪假人員兼職 普專，高專，轉業人員。 同行轉職，高高專，獎金業界最高 誠徵~ PO文代發FB，專~長期兼職人員~ 轉業，同行轉職，保險業，業務員，導遊，直銷，會發臉書FB的優先入取 誠徵：數名（專，長期兼職，代發FB人員） 工作內容：代發PO文。 由專人編輯房地產資訊，您負責轉發即可。 兼職工作地點：在家工作 專職工作地點：台中市 薪資福利：38000元+奬金 房屋帶看專員：徵5名 工作內容：協助主管客戶帶看，公司客戶您負責帶客戶看房。 上班時間：上午11點-17：00 薪資福利：45000元+奬金 另徵房地產仲介： 普專（無經驗可）45000元+高額獎金 房仲創新模式，新人公司專人一對一輔導快速培訓，7天上手，挑戰高收入，就是那麼簡單，你沒經驗公司給經驗。 顛覆傳統仲介模式，我們不一樣的9大優勢： 誠徵：帶看專員，FB專兼職PO文小幚手，房仲營業員（無經驗可）。 另徵：同業房仲，店長，副店，整團移轉，（獎金63％，業界％數最高） 不一樣的房仲～我們就是不一樣 創新模式。沒經驗可，員工股東化，人人是股東~ 有經驗的，歡迎來我們店當（店長~副店長） 我們不一樣的9大優勢： 1.150人團隊（獎金63％，業界％數最高） 2. 1對1教學，（私人教練）學長姐一個月保證教會你~開發~銷售（美式管理11點簽到，不打下班卡，，每週一次週會） 3.業界首創：591，謄本費用，公司全額吸收。 4.業界首創：店利潤，每個月與您分紅。 （人人是股東~員工股東化） 5.業界首創：新人是公司給您，幫你組建團隊 （你負責教學，當教練，）帶團隊獎金實拿18％ 6.業界所創：案件委託回來，公司專業的自媒體部門，幫你拍攝，出動空拍機，幫你登591 ，自媒體IG，斗音平臺引流，（不用自己用，浪費時間又不專業）不怕沒人幫你賣房，一條龍，費用全部公司吸收。 7.壯壯不動產商學院（三天完整培訓+實戰教學） 8.壯壯不動產：成立自媒體部門（免費打造每個人都會拍影片，塑造形象，走自媒體行銷） 9.業界首創，成立自媒體IG，斗音IP共享平台。 （老唐店長流量往下引流，IG，斗音搜尋老唐，並關注追蹤。 請關注老唐~給你不一樣的思維 https://www.instagram.com/w720923?igsh=bHg2dmUwOGxvaTNy&utm_source= 請關注老唐~給你不一樣的思維 https://vt.tiktok.com/ZS2D3Ev2j/ 東森房屋~南屯好市多~加盟店 壯壯不動產有限公司 公司地址，台中市西區南屯路一段200號 專案負責人： （老唐店長）或直接加（賴）0976-339-422 您是房屋仲介嗎，請看過來 做仲介最怕沒客戶，對吧 做仲介最怕沒委託，對吧 做仲介最怕不冒泡，對吧 （店長不做業績，負責給資源） 不一樣的房仲～我們就是不一樣 一對一教學，（私人教練）學長姐一個月保證教會你開發~銷售，創新模式。員工股東化，人人是股東~店利潤~每個月與你股東分紅，歡迎想挑戰業務的，沒經驗可，有經驗的，歡迎來我們店當（店長~副店）

帶看專員： 徵3名 1，工作內容： 公司提供客戶，您負責帶客戶看房，介紹該房屋優勢。 2，上班時間：上午11點-18：00 3，（無經驗可，公司培訓，肯學習，勤勞，形象佳優先入取，） 我們不一樣，跟傳統仲介就是不一樣！ 不動産營業員（想從事房產業的看過來） 仲介獨創模式，顛覆傳統仲介! 您是房屋仲介嗎，請看過來 做仲介最怕沒客戶，對吧，我們給客戶 做仲介最怕沒委託，對吧，我們給屋主 做仲介最怕不冒泡，對吧，我們協助你冒泡 在傳統仲介公司，自己找客戶，傳統公司客量少不可能給你客戶，別家做不到的我們做到了 公司負責：（開發客戶） 公司負責：（約客戶看房） 您只負責：（帶客戶看房） 客戶我們約好看屋給你，您只要負責帶看 獨創模式，顛覆傳統仲介，公司給客戶，公司看屋客戶多，帶不過來。 顛覆傳統仲介模式，我們不一樣的9大優勢： 誠徵：帶看專員，FB專兼職PO文小幚手，房仲營業員（無經驗可）。 另徵：同業房仲，店長，副店，整團移轉，（獎金63％，業界％數最高） 不一樣的房仲～我們就是不一樣 創新模式。沒經驗可，員工股東化，人人是股東~ 有經驗的，歡迎來我們店當（店長~副店長） 我們不一樣的9大優勢： 1.150人團隊（獎金63％，業界％數最高） 2. 1對1教學，（私人教練）學長姐一個月保證教會你~開發~銷售（美式管理11點簽到，不打下班卡，，每週一次週會） 3.業界首創：591，謄本費用，公司全額吸收。 4.業界首創：店利潤，每個月與您分紅。 （人人是股東~員工股東化） 5.業界首創：新人是公司給您，幫你組建團隊 （你負責教學，當教練，）帶團隊獎金實拿18％ 6.業界所創：案件委託回來，公司專業的自媒體部門，幫你拍攝，出動空拍機，幫你登591 ，自媒體IG，斗音平臺引流，（不用自己用，浪費時間又不專業）不怕沒人幫你賣房，一條龍，費用全部公司吸收。 7.壯壯不動產商學院（三天完整培訓+實戰教學） 8.壯壯不動產：成立自媒體部門（免費打造每個人都會拍影片，塑造形象，走自媒體行銷） 9.業界首創，成立自媒體IG，斗音IP共享平台。 （老唐店長流量往下引流，IG，抖音搜尋老唐，並關注追蹤。 請關注老唐~給你不一樣的思維 https://www.instagram.com/w720923?igsh=bHg2dmUwOGxvaTNy&utm_source= 請關注老唐~給你不一樣的思維 https://vt.tiktok.com/ZS2D3Ev2j/ 東森房屋~南屯好市多~加盟店 壯壯不動產有限公司 公司地址，台中市西區南屯路一段200號 專案負責人： （老唐店長）或直接加（賴）0976-339-422 您是房屋仲介嗎，請看過來 做仲介最怕沒客戶，對吧 做仲介最怕沒委託，對吧 做仲介最怕不冒泡，對吧 （店長不做業績，負責給資源） 不一樣的房仲～我們就是不一樣 一對一教學，（私人教練）學長姐一個月保證教會你開發~銷售，創新模式。員工股東化，人人是股東~店利潤~每個月與你股東分紅，歡迎想挑戰業務的，沒經驗可，有經驗的，歡迎來我們店當（店長~副店）

1.現場生產相關報表資料建立。 2.每月原物料等盤點複查及資料建立。 3.處理生產日/月等報表編製，協助與分析存貨庫齡與年度盤點。 3.廠務事項處理。 4.執行主管交辦事項。

1.製程與廠務理解:協助生產製程管制與人力/產能調配 2.稽核與改善能力，協助導入品管觀念:具內外部稽核經驗與協助持續改善 3.品質管理知識:了解ISO及熟悉QC七大手法 4.現場環境衛生及安全監督:負責廠區環境、安全與衛生的管理，建立相關規範並確保執行落實 5.配合相關作業:協助主管交辦事項與執行任務

1.行銷企劃:針對當前市場景氣形態調整行銷策略及作法 2.產品及業務開發:開拓潛在客戶，推廣公司產品 3.業務人員培訓:定期召開業務會議、督促和協調業務部門的工作進展 4.制定及達成公司銷售目標:年度銷售預測、執行及控管 5.配合相關作業:協助主管交辦事項與執行任務

1.設備管理:執行預防性保養計畫，記錄設備數據 2.工作進度跟催與施工協調:定期召開各工務會議並落實、督促和協調各部門的工作進展 3.現場丈量與圖面協作:協助現場尺寸丈量，與設計人員討論施工細節，並核對圖面資料 4.落實品質政策:監督施工品質、進度、安全與環保，落實稽核 5.配合相關作業:協助主管交辦事項與執行任務

1.行政庶務:電話接聽、接待訪客、行政相關交辦事項 2.文件管理作業:公文收發與文件檔案分類、編號、登記、入檔、保管 3.辦公耗材採購及管理:採購並維護公司庶務及文具用品等 4.工務資產管理:辦公設備、制服、用具、車輛等管理 5.配合相關作業:協助主管交辦事項與執行任務

1.配合主管及董事長行程:須配合主管及董事長行程，機動性待命 2.行政總務庶務:主管無接送需要時，則於辦公室內支援公司總務庶務.行政工作勤務 3.支援公司內部作業:信件及文件外出遞送 4.配合相關作業:協助主管交辦事項與執行任務