交大專區

請自行至本院徵才資訊網頁下載(本院官網-＞訊息專區-＞人才招募https://www.hch.gov.tw/?aid=506) –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 工作內容： 1. 空調系統運轉與維護管理。 2. 醫療環境與感染控制。 3. 能源管理與節能措施。 4. 設備管理與採購執行。 5. 其他臨時交辦事項。 注意事項： 1、假日需輪值班。 2、碩士以上理工相關科系畢業。 3、諳OFFICE辦系統。 員工福利(以下福利為每位職位員工均可申請)： 1.特休休假補助8000元(視當年院規規定)。 2.免費心理師咨詢。 3.免費法律顧問咨詢。 4.員工生日禮金。 5.員工節令獎金或禮券。 6.員工社團、文康活動。 7.員工家庭日或旅遊、或餐會。 8.員工電信費用群組優惠。(視每年簽約狀況) 9.員工存款優惠利率。 10.職前工作提敘、學歷提敘。 –––––––––––––––––––––––––––––––––––––––––––––- 1.應徵人員準備下列文件： (1)身份証影本。 (2)學歷証明文件。 (3)工作服務經歷証明。 (4)履歷表、其他證明影本。 3.報名日期：自公告起至115年8月11日下午5時00分止 4.報名方式：採■通訊■現場■電子郵件G03454@hch.gov.tw報名，請檢附「臺大醫院新竹臺大分院各類人員甄選登記表及學經歷、證照查核授權書(請自行至本院徵才資訊網頁下載(本院官網訊息專區人才招募https://www.hch.gov.tw/?aid=506」及上開應徵證件影本各1份，並於期限內寄(送)達本院工務室。(以郵戳為憑) 3.報名地點：通訊報名者請以掛號郵寄至「30059新竹市經國路一段442巷25號臺大醫院新竹臺大分院工務室鍾小姐收」，並請於信封上註明應徵單位、職稱及聯絡電話（請自行下載信封封面）。

1.廠區水電項目巡檢及維修 2.廠區機器設備故障排除、定期清潔、保養 3.會氬焊、電焊者為佳 4.廠商聯繫及監工 5.主管交辦事項完成 6.公共設施巡檢、維護、修繕、刷漆 7.依實際能力負擔管理責任 8.視實際需求配合外派 *依學經歷與經驗核薪 *水電、電機相關經驗及相關證照皆可 (證照津貼另計) *享久任獎金、備有單身宿舍

1.雷射切割、沖孔機機台操作，依照圖面完成產品切割加工。 2.機台雷射加工製程測試 3.機台操作及例行性機台清機保養 4.管理機台稼動狀況與品質管控及異常問題之排除。 5.雷射製程良率改善及製程提升。 6.處理與客戶端搭配的技術問題。 7.完成主管交辦事項

❐ 機電設備設施運轉保養維護檢查及巡檢。 -空調、電力、消防、給排水。 ❐ 日常館內修繕及相關作業之執行。 ❐ 臨時狀況緊急處理。 ❐ 其他經主管交辦之事項。 ❐ 休假制度 ▸做二休二

協助現場安裝石英石檯面-廚房衛浴流理檯的檯面、客廳的桌面等相關工作。

1.負責生產設備新增及新型設備評估 2.量產設備新增、測試及驗收 3.新型設備評估及導入 4.既有設備產能、性能提升改善 歡迎化學工程/電機電子工程/機械工程相關的無經驗！

1.BT新材料、新機台評估測試 2.層間導通孔之雷射技術測試開發、新機台評估測試 3.特殊結構流程評估開發 4.新產品導入評估開發

#Job Summary -Development of automotive mmWAVE Radar or Ultrasonic sensor circuit design, layout, testing, and troubleshooting -Electronic circuit design, layout review, EMC (Electromagnetic Compatibility) testing, and troubleshooting -Prototyping production and introduction to mass production -Product performance verification and regulatory certification -Willingness to travel internationally at least twice per year to the United States, Europe (Germany, Italy, etc.), or other countries where major automakers are headquartered. #General Job Requirements: -Promotion of new products within the group (proposal, demo) -Maintenance of existing products and customer relationships -Tasks assigned by the supervisor -Provide technical support to responsible clients #(Tier 1) Professional Job Requirements: -Take responsibility to the assigned development project -Collection and organization of data related to global regulations, automaker standards, and corporate guidelines -Prepare documents following development standards such as ISO 26262, ISO 21434, ASPICE, etc. -Development of new technologies and creation of related technical documents -Verification of developed technologies through theory, simulation platforms, or real vehicle testing -Support for DV (Design Validation) or PV (Product Validation) experiments -Patent proposals -Collection and organization of industry information #Annual evaluation (tied to annual KPIs) -Understanding of regulations and automaker standards -Improvement of professional technical knowledge -Understanding of the group’s products #Design and development -Collaborating with engineering teams, including antenna engineers, to optimize circuit design, product assembly, heat dissipation, and electromagnetic effects. -Simulation analysis and problem-solving for electronic hardware designs -Verification testing and measurement reports for electronic hardware designs -Solving SI(signal Integrity) and PI(Power integrity) issues and ensuring compliance with customer‘s EMC (Electromagnetic Compatibility) standards. -Designing and producing testing equipment for testing, validation and production. -Searching and validating new electronic materials -Supporting quality issues analysis and design improvement #Failure or Quality analysis Development Phase: -Troubleshooting system failures -Identify and resolve system issues Production Phase: -Collecting and addressing customer complaints -Providing post-production support to customers #Document production -Writing technical specification documents for electronic hardware products -Preparing and updating Bill of Materials (BOM) documentation and managing inventory through the company‘s management system -Preparation of development documents, including production-ready diagrams and related materials -Compliance with system standards (e.g. ISO26262) #Prototyping -DUT preparation for demo/testing #Technical support -Remote/ On site support for end customer or 3rd parties involved in the project. -Remote/ On site supports internal TTE group for training or technology transfer. #Expertise -Circuit design, Layout, SI/PI, EMC #Technical Skills -OrCAD/Pads/Altium Designer…

#Job Summary: -Development of automotive Camera circuit design, layout, testing, and troubleshooting -Electronic circuit design, layout review, EMC (Electromagnetic Compatibility) testing, and troubleshooting -Prototyping production and introduction to mass production -Product performance verification and regulatory certification -Willingness to travel internationally at least twice per year to the United States, Europe (Germany, Italy, etc.), or other countries where major automakers are headquartered. #General Job Requirements: -Promotion of new products within the group (proposal, demo) -Maintenance of existing products and customer relationships -Tasks assigned by the supervisor -Provide technical support to responsible clients #(Tier 1) Professional Job Requirements: -Take responsibility to the assigned development project -Collection and organization of data related to global regulations, automaker standards, and corporate guidelines -Prepare documents following development standards such as ISO 26262, ISO 21434, ASPICE, etc. -Development of new technologies and creation of related technical documents -Verification of developed technologies through theory, simulation platforms, or real vehicle testing -Support for DV (Design Validation) or PV (Product Validation) experiments -Patent proposals -Collection and organization of industry information #Annual evaluation (tied to annual KPIs) -Understanding of regulations and automaker standards -Improvement of professional technical knowledge Understanding of the group’s products #Design and development -Collaborating with engineering teams, including antenna engineers, to optimize circuit design, product assembly, heat dissipation, and electromagnetic effects. -Simulation analysis and problem-solving for electronic hardware designs -Verification testing and measurement reports for electronic hardware designs -Solving SI(signal Integrity) and PI(Power integrity) issues and ensuring compliance with customer‘s EMC (Electromagnetic Compatibility) standards. -Designing and producing testing equipment for testing, validation and production. -Searching and validating new electronic materials -Supporting quality issues analysis and design improvement #Failure or Quality analysis: Development Phase: -Troubleshooting system failures -Identify and resolve system issues Production Phase: -Collecting and addressing customer complaints -Providing post-production support to customers #Document production: -Writing technical specification documents for electronic hardware products -Preparing and updating Bill of Materials (BOM) documentation and managing inventory through the company‘s management system -Preparation of development documents, including production-ready diagrams and related materials -Compliance with system standards (e.g. ISO26262) #Prototyping: -DUT preparation for demo/testing #Technical support: -Remote/ On site support for end customer or 3rd parties involved in the project. -Remote/ On site supports internal TTE group for training or technology transfer. #Expertise: -Circuit design, Layout, SI/PI, EMC -Optical lens and image sensor matching. #Technical Skills: -OrCAD/Pads/Altium Designer…

因應「強化經濟社會及民生國安韌性」特別預算案，需求特定性定期契約人員從事技術生產工作，錄取後依考生學經歷、專長、個人特質賦予以下一或多項工作： 1.執行專案內系統軟/硬體測試、檢測、軟體更新、版本發布、安裝、參數設定及部署作業。 2.執行專案內系統軟/硬體組裝架設、故障查修、問題排除、定期及不定期維護作業。 3.執行專案內之會勘、會勘紀錄、裝備安裝、系統測試、測試、訓練、維運、系統維護、包搬儲運、解繳部署、施作督工及介面整合等工作。 4.執行專案計畫相關陣地工程施作監工、問題紀錄與彙整等作業。 5.執行專案系統工程之相關文件/簡報彙整及產出等作業。

因應「強化經濟社會及民生國安韌性」特別預算案，需求特定性定期契約人員從事技術生產工作，錄取後依考生學經歷、專長、個人特質賦予以下一或多項工作： 1.執行產品測試規劃、產製與系統整合測試。 2.執行產品清點、交運、安裝及系統設定作業。 3.執行通信裝備性能測試、安裝與解繳。 4.執行陣地會勘、監工與陣勘報告產出。 5.執行保密、語音裝備及通裝系統建置、維護、維修。 6.執行通信系統設定更新與定期保養、構改與驗證。 7.執行系統功、性能驗測、安裝、測試、量測、失效維護及環境試驗等作業。 8.專案產品相關品質文件產出及彙整作業。 9.專案之客戶/跨單位溝通協調、各項進度管控會議召開等。

智慧醫療產品機構設計開發

因應「強化經濟社會及民生國安韌性」特別預算案，需求特定性定期契約人員從事技術生產工作，錄取後依考生學經歷、專長、個人特質賦予以下一或多項工作： 1.執行裝備產製、組裝、測試、檢測、維修、品保、陣地安裝及部署等工作。 2.系統功能維護、問題排除與相關紀錄彙整製作。

智慧醫療產品機構設計開發

#Job summary: -As a key contributor, you will work on embedded software development using C/C++ in RTOS environments, supporting vehicle network protocols (CAN, CANFD, LIN, Ethernet) and AUTOSAR/QNX-based platforms. You will collaborate closely with cross-functional teams across hardware, mechanical, and system engineering to deliver production-ready software that meets automotive industry standards including ASPICE, ISO 26262, and ISO 21434. -Willingness to travel internationally at least twice per year to the United States, Europe (Germany, Italy, etc.), or other countries where major automakers are headquartered. -We are looking for an experienced Embedded Software Integrator to join our Automotive R&D team at TTE. This role is responsible for integrating and validating embedded software for automotive electronic control units (ECUs) and sensor systems. #General duties: -Promotion of new products within the group (proposal, demo) -Maintenance of existing products and customer relationships -Tasks assigned by the supervisor -Provide technical support to responsible clients #(Tier 1) Professional Job Requirements: -Take responsibility to the assigned development project -Collection and organization of data related to global regulations, automaker standards, and corporate guidelines -Prepare documents following development standards such as ISO 26262, ISO 21434, ASPICE, etc. -Development of new technologies and creation of related technical documents -Verification of developed technologies through theory, simulation platforms, or real vehicle testing -Support for DV (Design Validation) or PV (Product Validation) experiments -Patent proposals -Collection and organization of industry information #Failure or Quality analysis -Development Phase: Troubleshooting system failures Identify and resolve system issues -Production Phase: Collecting and addressing customer complaints Providing post-production support to customers #Document production -Preparation of development documents, including production-ready diagrams and related materials -Compliance with system standards (e.g. ASPICE, ISO26262, ISO21434) -Documentation on processes or development activities #Prototyping -Technical support #Technical support -Remote/ On site support for end customer or 3rd parties involved in the project. -Remote/ On site supports internal TTE group for training or technology transfer. [Technical Skills] -C/C++ programming language -Vehicle network (CAN, CANFD, LIN, ethernet) -RTOS -Embedded System Development -Familiar with AutoSAR/QNX development

1. 檢測設備產品之模組組裝、測試除錯。 2. 系統調整、出貨作業。

1、蒐集分析相關產品及零組件資訊 2、類比或數位線路功能開發及設計除錯 3、產品維護和客戶應用問題解決 4、自動測試設備的設計/實作/數據分析 5、FPGA、MCU韌體設計及軟體功能驗證、整合測試 **歡迎對數位、韌體、測試、類比或 DSP 領域有興趣者加入，工作內容將依個人專長安排。

（一）負責院區電腦中心輪班工作(主機系統管控操作、批次作業執行)。 （二）負責院區相關電腦請修處理與諮詢服務。 （三）維護機房設備正常運轉與機房安全。

因應「強化經濟社會及民生國安韌性」特別預算案，需求特定性定期契約人員從事技術生產工作，錄取後依考生學經歷、專長、個人特質賦予以下一或多項工作： 1.系統檢測、故障排除及維護工作。 2.現場會勘、施作督工。